Messages in this thread | | | Date | Mon, 24 Dec 2018 18:58:48 +0000 | From | Mark Brown <> | Subject | [GIT PULL] regulator updates for v4.21 |
| |
The following changes since commit 7566ec393f4161572ba6f11ad5171fd5d59b0fbd:
Linux 4.20-rc7 (2018-12-16 15:46:55 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git tags/regulator-v4.21
for you to fetch changes up to c3b5725965228014215de553eed3492dbd80a4bd:
Merge remote-tracking branch 'regulator/topic/coupled' into regulator-next (2018-12-21 13:43:35 +0000)
---------------------------------------------------------------- regulator: Updates for v4.20
This has been a very busy release for the core, some fixes, one large new feature and a big bit of refactoring to update the GPIO API:
- Support for coupled regulators from Dmitry Osipenko based on a prior attempt by Maciej Purski, allowing us to handle situations where the voltages on two regulators can't be too far apart from each other. - Conversion of the GPIO support in both drivers and the core to use GPIO descriptors rather than numbers, part of the overall project to remove GPIO numbers. - Support for standby mode suspend states from Andrei Stefanescu. - New drivers for Allwinner AXP209, Cirrus Logic Lochnagar and Microchip MPC16502.
---------------------------------------------------------------- Adam Ford (1): regulator: pfuze100-regulator: add coin support to PF0100
Andrei.Stefanescu@microchip.com (7): regulator: dt-bindings: add regulator-state-standby bindings regulator: of: add support for parsing regulator-state-standby regulator: dt-bindings: add MCP16502 regulator bindings MAINTAINERS: add maintainer for MCP16502 PMIC driver regulator: mcp16502: add regulator driver for MCP16502 regulator: mcp16502: add support for suspend regulator: mcp16502: code cleanup
Axel Lin (4): regulator: bd718x7: Use regulator_map_voltage_ascend for buck5 and buck7 regulator: mcp16502: Use #ifdef CONFIG_PM_SLEEP around mcp16502_suspend/resume_noirq regulator: mcp16502: Fix missing n_voltages setting regulator: mcp16502: Select REGMAP_I2C to fix build error
Boris Brezillon (1): regulator: act8945a-regulator: Implement PM functionalities
Charles Keepax (6): regulator: lochnagar: Explicitly include register headers regulator: lochnagar: Move driver to binding from DT regulator: lochnagar: Add initial binding documentation regulator: wm8994: Don't use devres for enable GPIOs regulator: Factor out location of init data OF node regulator: Allow regulator nodes to contain their own init data
Claudiu Beznea (5): regulator: act8945a-regulator: unlock expert registers regulator: act8945a-regulator: fix line over 80 chars warning regulator: act8945a-regulator: add shutdown function regulator: add documentation for regulator modes and suspend states regulator: act8945a-regulator: fix 'defined but not used' compiler warning
Dmitry Osipenko (12): regulator: core: Mutually resolve regulators coupling regulator: core: Don't allow to get regulator until all couples resolved regulator: Change regulator-coupled-max-spread property regulator: core: Limit regulators coupling to a single couple regulator: Document new regulator-max-step-microvolt property regulator: core: Add new max_uV_step constraint regulator: core: Decouple regulators on regulator_unregister() regulator: core: Use ww_mutex for regulators locking regulator: core: Properly handle case where supply is the couple regulator: core: Keep regulators-list locked while traversing the list regulator: Change regulator-coupled-max-spread property regulator: core: Export regulator_lock and regulator_unlock
Douglas Anderson (6): regulator: core: Properly expose requested_microamps in sysfs regulator: core: Don't double-disable supplies in regulator_disable_deferred() regulator: core: Only count load for enabled consumers regulator: core: Avoid propagating to supplies when possible regulator: core: Apply system load even if no consumer loads regulator: core: Clean enabling always-on regulators + their supplies
Geert Uytterhoeven (1): regulator: bd718x7: Remove double indirection for bd718xx_pmic_inits.rdatas
Kangjie Lu (2): drivers/regulator: fix a missing check of return value regulator: tps65910: fix a missing check of return value
Kuninori Morimoto (2): regulator: bd9571mwv: convert to SPDX identifiers regulator: as3711: convert to SPDX identifiers
Linus Walleij (20): regulator: s2mps11: Pass descriptor instead of GPIO number regulator: wm8994: Pass descriptor instead of GPIO number regulator: max77686: Pass descriptor instead of GPIO number regulator: core: Track dangling GPIO descriptors regulator: fixed: Let core handle GPIO descriptor regulator: lm363x: Let core handle GPIO descriptor regulator: lp8788-ldo: Let core handle GPIO descriptor regulator: max8952: Let core handle GPIO descriptor gpio: Export gpiod_get_from_of_node() regulator: max77686: Let core handle GPIO descriptor gpio: Enable nonexclusive gpiods from DT nodes gpio: devres: Handle nonexclusive GPIOs gpio: Add devm_gpiod_unhinge() regulator: max8973: Let core handle GPIO descriptor regulator: da9211: Hand over GPIO to regulator core regulator: s5m8767: Hand over GPIO to regulator core regulator: tps65090: Hand over GPIO to regulator core regulator: s2mps11: Hand over GPIO to regulator core regulator: wm8994: Rely on core to handle GPIO descriptor regulator: arizona-ldo1: Rely on core to handle GPIO descriptor
Maciej Purski (2): regulator: core: Add voltage balancing mechanism regulator: core: Change voltage setting path
Marek Szyprowski (1): regulator: s2mps11: Fix GPIO descriptor initialization
Mark Brown (8): Merge branch 'topic/coupled' of https://git.kernel.org/.../broonie/regulator into regulator-4.21 for trivial conflict regulator: Fix return value of _set_load() stub Merge branch 'regulator-4.20' into regulator-linus Merge branch 'for-linus' of https://git.kernel.org/.../broonie/regulator into regulator-4.21 Merge branch 'topic/axp20x' of https://git.kernel.org/.../broonie/regulator into regulator-4.21 Merge branch 'regulator-4.20' into regulator-linus Merge branch 'regulator-4.21' into regulator-next Merge remote-tracking branch 'regulator/topic/coupled' into regulator-next
Matti Vaittinen (2): regulator: bd718x7: add missing linux/of.h inclusion (deja-vu) regulator: bd718x7: Change next state after poweroff to ready
Olliver Schinagl (10): regulator: core: enable power when setting up constraints regulator: axp20x: use defines for masks mfd: axp20x: name voltage ramping define properly regulator: axp20x: add support for set_ramp_delay for AXP209 dt-bindings: mfd: axp20x: add support for regulator-ramp-delay for AXP209 regulator: axp20x: add software based soft_start for AXP209 LDO3 dt-bindings: mfd: axp20x: Add software based soft_start for AXP209 LDO3 regulator: dts: enable soft-start and ramp delay for the OLinuXino Lime2 mfd: axp20x: Clean up included headers mfd: axp20x: use explicit bit defines
Pascal PAILLET-LME (1): regulator: stpmic1: fix regulator_lock usage
Priit Laes (1): regulator: axp20x: fix set_ramp_delay for AXP209/dcdc2
Rob Herring (1): regulator: Use of_node_name_eq for node name comparisons
Ryan Case (1): spi: spi-qcom-qspi: Fix remaining driver nits
Wei Yongjun (1): regulator: act8945a-regulator: make symbol act8945a_pm static
Yangtao Li (1): regulator: convert to DEFINE_SHOW_ATTRIBUTE
zoro (1): regulator/of_get_regulator: add child path to find the regulator supplier
Documentation/devicetree/bindings/mfd/axp20x.txt | 9 + .../bindings/regulator/act8945a-regulator.txt | 34 + .../bindings/regulator/cirrus,lochnagar.txt | 82 ++ .../bindings/regulator/mcp16502-regulator.txt | 143 +++ .../devicetree/bindings/regulator/regulator.txt | 12 +- Documentation/driver-model/devres.txt | 1 + MAINTAINERS | 7 + arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 + arch/arm/mach-s3c64xx/mach-crag6410-module.c | 17 +- drivers/gpio/gpiolib-devres.c | 80 +- drivers/gpio/gpiolib.c | 2 + drivers/gpio/gpiolib.h | 6 - drivers/mfd/axp20x.c | 13 +- drivers/mfd/wm8994-core.c | 9 - drivers/regulator/88pm8607.c | 2 +- drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/act8945a-regulator.c | 205 +++- drivers/regulator/arizona-ldo1.c | 3 - drivers/regulator/as3711-regulator.c | 5 +- drivers/regulator/axp20x-regulator.c | 876 +++++++++++--- drivers/regulator/bd718x7-regulator.c | 33 +- drivers/regulator/bd9571mwv-regulator.c | 10 +- drivers/regulator/core.c | 1199 ++++++++++++++++---- drivers/regulator/da9052-regulator.c | 2 +- drivers/regulator/da9210-regulator.c | 4 +- drivers/regulator/da9211-regulator.c | 6 + drivers/regulator/dbx500-prcmu.c | 35 +- drivers/regulator/fixed.c | 6 +- drivers/regulator/internal.h | 2 + drivers/regulator/lm363x-regulator.c | 8 +- drivers/regulator/lochnagar-regulator.c | 50 +- drivers/regulator/lp8788-ldo.c | 8 +- drivers/regulator/max77686-regulator.c | 29 +- drivers/regulator/max8952.c | 10 +- drivers/regulator/max8973-regulator.c | 8 +- drivers/regulator/max8997-regulator.c | 2 +- drivers/regulator/mc13xxx-regulator-core.c | 2 +- drivers/regulator/mcp16502.c | 552 +++++++++ drivers/regulator/of_regulator.c | 81 +- drivers/regulator/palmas-regulator.c | 5 +- drivers/regulator/pfuze100-regulator.c | 2 + drivers/regulator/qcom-rpmh-regulator.c | 2 +- drivers/regulator/s2mps11.c | 54 +- drivers/regulator/s5m8767.c | 11 +- drivers/regulator/stpmic1_regulator.c | 4 +- drivers/regulator/tps65090-regulator.c | 6 + drivers/regulator/tps65910-regulator.c | 4 +- drivers/regulator/wm8350-regulator.c | 4 +- drivers/regulator/wm8994-regulator.c | 33 +- drivers/spi/spi-qcom-qspi.c | 8 +- .../regulator/active-semi,8945a-regulator.h | 30 + include/linux/gpio/consumer.h | 23 + include/linux/mfd/axp20x.h | 4 +- include/linux/mfd/wm8994/pdata.h | 3 - include/linux/regulator/consumer.h | 2 +- include/linux/regulator/driver.h | 9 +- include/linux/regulator/machine.h | 3 + include/linux/regulator/pfuze100.h | 3 +- 59 files changed, 3141 insertions(+), 635 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt create mode 100644 Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt create mode 100644 drivers/regulator/mcp16502.c create mode 100644 include/dt-bindings/regulator/active-semi,8945a-regulator.h [unhandled content-type:application/pgp-signature] | |