Messages in this thread Patch in this message | | | From | Martin Blumenstingl <> | Subject | [PATCH 1/3] clk: meson: meson8b: fix the offset of vid_pll_dco's N value | Date | Sun, 2 Dec 2018 22:42:18 +0100 |
| |
Unlike the other PLLs on Meson8b the N value "vid_pll_dco" (a better name would be hdmi_pll_dco or - as the datasheet calls it - HPLL) is located at HHI_VID_PLL_CNTL[14:10] instead of [13:9]. This results in an incorrect calculation of the rate of this PLL because the value seen by the kernel is double the actual N (divider) value. Update the offset of the N value to fix the calculation of the PLL rate.
Fixes: 28b9fcd016126e ("clk: meson8b: Add support for Meson8b clocks") Reported-by: Jianxin Pan <jianxin.pan@amlogic.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- drivers/clk/meson/meson8b.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c index f906a9f0eefd..a4ae9c957fde 100644 --- a/drivers/clk/meson/meson8b.c +++ b/drivers/clk/meson/meson8b.c @@ -134,7 +134,7 @@ static struct clk_regmap meson8b_vid_pll_dco = { }, .n = { .reg_off = HHI_VID_PLL_CNTL, - .shift = 9, + .shift = 10, .width = 5, }, .l = { -- 2.19.2
| |