Messages in this thread Patch in this message | ![/](/images/icornerl.gif) | | From | Mark Brown <> | Subject | Applied "regulator: add documentation for regulator modes and suspend states" to the regulator tree | Date | Thu, 13 Dec 2018 12:08:59 +0000 (GMT) |
| |
The patch
regulator: add documentation for regulator modes and suspend states
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 8a582fa9429108c247ff56dfbc4e3ead08a76956 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea <claudiu.beznea@microchip.com> Date: Tue, 11 Dec 2018 15:56:59 +0000 Subject: [PATCH] regulator: add documentation for regulator modes and suspend states
Add documentation for regulator modes and suspend states.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org> --- .../bindings/regulator/act8945a-regulator.txt | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt index ac955dea00d1..4017527619ab 100644 --- a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt @@ -15,11 +15,17 @@ Optional input supply properties: - inl67-supply: The input supply for REG_LDO3 and REG_LDO4 Any standard regulator properties can be used to configure the single regulator. +regulator-initial-mode, regulator-allowed-modes and regulator-mode could be +specified using mode values from dt-bindings/regulator/active-semi,8945a-regulator.h +file. The valid names for regulators are: REG_DCDC1, REG_DCDC2, REG_DCDC3, REG_LDO1, REG_LDO2, REG_LDO3, REG_LDO4. Example: + +#include <dt-bindings/regulator/active-semi,8945a-regulator.h> + pmic@5b { compatible = "active-semi,act8945a"; reg = <0x5b>; @@ -32,6 +38,18 @@ Example: regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; + + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt=<1400000>; + regulator-suspend-max-microvolt=<1400000>; + regulator-changeable-in-suspend; + regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>; + }; }; vdd_1v2_reg: REG_DCDC2 { @@ -39,6 +57,14 @@ Example: regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1300000>; regulator-always-on; + + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_3v3_reg: REG_DCDC3 { @@ -53,6 +79,14 @@ Example: regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; + + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_3v3_lp_reg: REG_LDO2 { -- 2.19.0.rc2
| ![\](/images/icornerr.gif) |