lkml.org 
[lkml]   [2018]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mtd: spi-nor: cadence-quadspi: write upto 8-bytes data in STIG mode
Date
cadence-quadspi controller allows upto eight bytes of data to be transferred
in software Triggered Instruction generator (STIG) mode of operation. Lower
4 bytes are written through writedatalower and upper 4 bytes by
writedataupper register.

This patch allows all the 8 bytes to be written.

Signed-off-by: Purna Chandra Mandal <purna.chandra.mandal@intel.com>
---

drivers/mtd/spi-nor/cadence-quadspi.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
index 04cedd3a2bf6..990934387fea 100644
--- a/drivers/mtd/spi-nor/cadence-quadspi.c
+++ b/drivers/mtd/spi-nor/cadence-quadspi.c
@@ -420,7 +420,7 @@ static int cqspi_command_write(struct spi_nor *nor, const u8 opcode,
unsigned int data;
int ret;

- if (n_tx > 4 || (n_tx && !txbuf)) {
+ if (n_tx > CQSPI_STIG_DATA_LEN_MAX || (n_tx && !txbuf)) {
dev_err(nor->dev,
"Invalid input argument, cmdlen %d txbuf 0x%p\n",
n_tx, txbuf);
@@ -435,8 +435,13 @@ static int cqspi_command_write(struct spi_nor *nor, const u8 opcode,
data = 0;
memcpy(&data, txbuf, n_tx);
writel(data, reg_base + CQSPI_REG_CMDWRITEDATALOWER);
- }

+ if (n_tx > 4) {
+ data = 0;
+ memcpy(&data, txbuf + 4, n_tx - 4);
+ writel(data, reg_base + CQSPI_REG_CMDWRITEDATAUPPER);
+ }
+ }
ret = cqspi_exec_flash_cmd(cqspi, reg);
return ret;
}
--
2.13.0
\
 
 \ /
  Last update: 2018-12-14 03:15    [W:0.054 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site