lkml.org 
[lkml]   [2018]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] hwmon: (pmbus) remove redundant 'default n' from Kconfig
Date
'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

...
One side effect of (and the main motivation for) this change is making
the following two definitions behave exactly the same:

config FOO
bool

config FOO
bool
default n

With this change, neither of these will generate a
'# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
That might make it clearer to people that a bare 'default n' is
redundant.
...

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/hwmon/pmbus/Kconfig | 15 ---------------
1 file changed, 15 deletions(-)

Index: b/drivers/hwmon/pmbus/Kconfig
===================================================================
--- a/drivers/hwmon/pmbus/Kconfig 2018-10-09 15:58:39.067122941 +0200
+++ b/drivers/hwmon/pmbus/Kconfig 2018-10-10 16:31:57.671888538 +0200
@@ -5,7 +5,6 @@
menuconfig PMBUS
tristate "PMBus support"
depends on I2C
- default n
help
Say yes here if you want to enable PMBus support.

@@ -28,7 +27,6 @@ config SENSORS_PMBUS

config SENSORS_ADM1275
tristate "Analog Devices ADM1275 and compatibles"
- default n
help
If you say yes here you get hardware monitoring support for Analog
Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293,
@@ -49,7 +47,6 @@ config SENSORS_IBM_CFFPS

config SENSORS_IR35221
tristate "Infineon IR35221"
- default n
help
If you say yes here you get hardware monitoring support for the
Infineon IR35221 controller.
@@ -59,7 +56,6 @@ config SENSORS_IR35221

config SENSORS_LM25066
tristate "National Semiconductor LM25066 and compatibles"
- default n
help
If you say yes here you get hardware monitoring support for National
Semiconductor LM25056, LM25066, LM5064, and LM5066.
@@ -69,7 +65,6 @@ config SENSORS_LM25066

config SENSORS_LTC2978
tristate "Linear Technologies LTC2978 and compatibles"
- default n
help
If you say yes here you get hardware monitoring support for Linear
Technology LTC2974, LTC2975, LTC2977, LTC2978, LTC2980, LTC3880,
@@ -88,7 +83,6 @@ config SENSORS_LTC2978_REGULATOR

config SENSORS_LTC3815
tristate "Linear Technologies LTC3815"
- default n
help
If you say yes here you get hardware monitoring support for Linear
Technology LTC3815.
@@ -98,7 +92,6 @@ config SENSORS_LTC3815

config SENSORS_MAX16064
tristate "Maxim MAX16064"
- default n
help
If you say yes here you get hardware monitoring support for Maxim
MAX16064.
@@ -108,7 +101,6 @@ config SENSORS_MAX16064

config SENSORS_MAX20751
tristate "Maxim MAX20751"
- default n
help
If you say yes here you get hardware monitoring support for Maxim
MAX20751.
@@ -118,7 +110,6 @@ config SENSORS_MAX20751

config SENSORS_MAX31785
tristate "Maxim MAX31785 and compatibles"
- default n
help
If you say yes here you get hardware monitoring support for Maxim
MAX31785.
@@ -128,7 +119,6 @@ config SENSORS_MAX31785

config SENSORS_MAX34440
tristate "Maxim MAX34440 and compatibles"
- default n
help
If you say yes here you get hardware monitoring support for Maxim
MAX34440, MAX34441, MAX34446, MAX34451, MAX34460, and MAX34461.
@@ -138,7 +128,6 @@ config SENSORS_MAX34440

config SENSORS_MAX8688
tristate "Maxim MAX8688"
- default n
help
If you say yes here you get hardware monitoring support for Maxim
MAX8688.
@@ -148,7 +137,6 @@ config SENSORS_MAX8688

config SENSORS_TPS40422
tristate "TI TPS40422"
- default n
help
If you say yes here you get hardware monitoring support for TI
TPS40422.
@@ -167,7 +155,6 @@ config SENSORS_TPS53679

config SENSORS_UCD9000
tristate "TI UCD90120, UCD90124, UCD90160, UCD9090, UCD90910"
- default n
help
If you say yes here you get hardware monitoring support for TI
UCD90120, UCD90124, UCD90160, UCD9090, UCD90910, Sequencer and System
@@ -178,7 +165,6 @@ config SENSORS_UCD9000

config SENSORS_UCD9200
tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
- default n
help
If you say yes here you get hardware monitoring support for TI
UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
@@ -189,7 +175,6 @@ config SENSORS_UCD9200

config SENSORS_ZL6100
tristate "Intersil ZL6100 and compatibles"
- default n
help
If you say yes here you get hardware monitoring support for Intersil
ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105,
\
 
 \ /
  Last update: 2018-10-10 16:36    [W:0.030 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site