Messages in this thread | | | From | Douglas Anderson <> | Subject | [PATCH v2 0/4] phy: rockchip-typec: Set "flip" properly; some cleanups; fix swing | Date | Tue, 19 Sep 2017 12:56:26 -0700 |
| |
When connecting to certain DP monitors it was observed that only one of the two orientations of the type C to DP cable would work. Debugging showed that the problem was that we needed to set the type C "flip" state earlier. Once we did this, problems went away.
While trying to dig into this problem and some others, I found that the proper documentation for the Type C PHY was available to me. This allowed me to cleanup the magic numbers in the funtion that I was touching and also fix a few minor issues that (luckily) haven't caused any problems yet.
I also found that aux channel communications were flaky on some adapters until I adjusted the voltage swing.
For this series I've added Chris Zhong's Reviewed-by tags to some of the patches since he gave a +1 to nearly identical patches on the Chrome OS gerrit and I didn't think he'd mind me carrying his tag. If folks would rather I didn't do that, please yell.
Changes in v2: - Removed extra blank line - Voltage swing patch new for v2.
Douglas Anderson (4): phy: rockchip-typec: Set the AUX channel flip state earlier phy: rockchip-typec: Avoid magic numbers + add delays in aux calib phy: rockchip-typec: Do the calibration more correctly phy: rockchip-typec: Don't set the aux voltage swing to 400 mV
drivers/phy/rockchip/phy-rockchip-typec.c | 246 ++++++++++++++++++++++++------ 1 file changed, 201 insertions(+), 45 deletions(-)
-- 2.14.1.690.gbb1197296e-goog
| |