lkml.org 
[lkml]   [2017]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] ARM: dts: Add the PWM node to Cygnus
From
Date


On 08/31/2017 01:10 PM, Scott Branden wrote:
> pwm node is correct.
>
>
> On 17-08-31 11:54 AM, Eric Anholt wrote:
>> This is connected up to the backlight on 911360_entphn, which we'll
>> need for a panel driver. For now, leave the node disabled in the
>> shared dtsi.
>>
>> Signed-off-by: Eric Anholt <eric@anholt.net>
> Acked-by: Scott Branden <scott.branden@broadcom.com>

Applied to devicetree/next:

https://github.com/Broadcom/stblinux/commit/31807d46f85c4d86ef3b6df9c5a4e69d35f75bc0

>> ---
>> arch/arm/boot/dts/bcm-cygnus.dtsi | 8 ++++++++
>> 1 file changed, 8 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi
>> b/arch/arm/boot/dts/bcm-cygnus.dtsi
>> index 74f73ff24aec..b9a654d733ae 100644
>> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
>> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
>> @@ -585,6 +585,14 @@
>> status = "disabled";
>> };
>> + pwm: pwm@180aa500 {
>> + compatible = "brcm,kona-pwm";
>> + reg = <0x180aa500 0xc4>;
>> + #pwm-cells = <3>;
>> + clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>;
>> + status = "disabled";
>> + };
>> +
>> keypad: keypad@180ac000 {
>> compatible = "brcm,bcm-keypad";
>> reg = <0x180ac000 0x14c>;
>

--
Florian

\
 
 \ /
  Last update: 2017-09-02 04:11    [W:0.040 / U:7.324 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site