lkml.org 
[lkml]   [2017]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH 2/2] ARM: dts: Add the PWM node to Cygnus
    From
    Date
    pwm node is correct.


    On 17-08-31 11:54 AM, Eric Anholt wrote:
    > This is connected up to the backlight on 911360_entphn, which we'll
    > need for a panel driver. For now, leave the node disabled in the
    > shared dtsi.
    >
    > Signed-off-by: Eric Anholt <eric@anholt.net>
    Acked-by: Scott Branden <scott.branden@broadcom.com>
    > ---
    > arch/arm/boot/dts/bcm-cygnus.dtsi | 8 ++++++++
    > 1 file changed, 8 insertions(+)
    >
    > diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
    > index 74f73ff24aec..b9a654d733ae 100644
    > --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
    > +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
    > @@ -585,6 +585,14 @@
    > status = "disabled";
    > };
    >
    > + pwm: pwm@180aa500 {
    > + compatible = "brcm,kona-pwm";
    > + reg = <0x180aa500 0xc4>;
    > + #pwm-cells = <3>;
    > + clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>;
    > + status = "disabled";
    > + };
    > +
    > keypad: keypad@180ac000 {
    > compatible = "brcm,bcm-keypad";
    > reg = <0x180ac000 0x14c>;

    \
     
     \ /
      Last update: 2017-08-31 22:10    [W:4.511 / U:0.332 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site