lkml.org 
[lkml]   [2017]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 1/1] usb:host:xhci support option to disable the xHCI USB2 HW LPM
Date
XHCI specification 1.1 does not require xHCI-compliant controllers
to always enable hardware USB2 LPM. However, the current xHCI
driver always enable it when seeing HLC=1.
This patch supports an option for users to control disabling
USB2 Hardware LPM via DT/ACPI attribute.
This option is needed in case user would like to disable this
feature. For example, their xHCI controller has its USB2 HW LPM
broken.

Signed-off-by: Tung Nguyen <tunguyen@apm.com>
Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes since v4:
- When HW LPM is optionally disabled, explicitly disable HLE, RWE, ...
- Update codes to work with kernel 4.13-rc4
- Add Acked-By from Rob Herring <robh@kernel.org>
Changes since v3:
- Bypass updating LPM parameters when HW LPM is optionally disabled.
Changes since v2:
- Change code to disable HW LPM as an option for user which
is set via ACPI/DT.
Changes since v1:
- Update DT/ACPI attribute and corresponding codes from HLE to LPM to
be consistent with other attribute names.
---
Documentation/devicetree/bindings/usb/usb-xhci.txt | 1 +
drivers/usb/host/xhci-plat.c | 3 +++
drivers/usb/host/xhci.c | 2 +-
drivers/usb/host/xhci.h | 1 +
4 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index 2d80b60..ae6e484 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -26,6 +26,7 @@ Required properties:

Optional properties:
- clocks: reference to a clock
+ - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
- usb3-lpm-capable: determines if platform is USB3 LPM capable
- quirk-broken-port-ped: set if the controller has broken port disable mechanism

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index c04144b..9028fb5 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -267,6 +267,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
goto disable_clk;
}

+ if (device_property_read_bool(sysdev, "usb2-lpm-disable"))
+ xhci->quirks |= XHCI_HW_LPM_DISABLE;
+
if (device_property_read_bool(sysdev, "usb3-lpm-capable"))
xhci->quirks |= XHCI_LPM_SUPPORT;

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index b2ff1ff..3a8e75f 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4087,7 +4087,7 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
enable ? "enable" : "disable", port_num + 1);

- if (enable) {
+ if (enable && !(xhci->quirks & XHCI_HW_LPM_DISABLE)) {
/* Host supports BESL timeout instead of HIRD */
if (udev->usb2_hw_lpm_besl_capable) {
/* if device doesn't have a preferred BESL value use a
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index e3e9352..5d89c51 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1821,6 +1821,7 @@ struct xhci_hcd {
#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26)
#define XHCI_U2_DISABLE_WAKE (1 << 27)
#define XHCI_ASMEDIA_MODIFY_FLOWCONTROL (1 << 28)
+#define XHCI_HW_LPM_DISABLE (1 << 29)

unsigned int num_active_eps;
unsigned int limit_active_eps;
--
1.7.1
\
 
 \ /
  Last update: 2017-08-08 06:28    [W:0.059 / U:0.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site