Messages in this thread Patch in this message | | | From | Soren Brinkmann <> | Subject | [PATCH 1/2] media:imx274 device tree binding file | Date | Mon, 28 Aug 2017 08:15:33 -0700 |
| |
From: Leon Luo <leonl@leopardimaging.com>
The binding file for imx274 CMOS sensor V4l2 driver
Signed-off-by: Leon Luo <leonl@leopardimaging.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> --- .../devicetree/bindings/media/i2c/imx274.txt | 32 ++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/imx274.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt new file mode 100644 index 000000000000..9154666d1149 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/imx274.txt @@ -0,0 +1,32 @@ +* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor + +The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with +an active array size of 3864H x 2202V. It is programmable through I2C +interface. The I2C address is fixed to 0x1a as per sensor data sheet. +Image data is sent through MIPI CSI-2, which is configured as 4 lanes +at 1440 Mbps. + + +Required Properties: +- compatible: value should be "sony,imx274" for imx274 sensor + +Optional Properties: +- reset-gpios: Sensor reset GPIO + +For further reading on port node refer to +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + imx274: sensor@1a{ + compatible = "sony,imx274"; + reg = <0x1a>; + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&gpio_sensor 0 0>; + port@0 { + reg = <0>; + sensor_out: endpoint { + remote-endpoint = <&csiss_in>; + }; + }; + }; -- 2.14.1.3.g5766cf452
| |