lkml.org 
[lkml]   [2017]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
Subjectrk3288: mmcblk0: error -110 sending status command, retrying
Hi,

Did anyone observing error -110 and -84 during boot on rk3288 target?
full log here[1] and used dts node is[2].

Proper card detection is done, once we insert after console came-up
# [ 39.635614] mmc0: card 59b4 removed
[ 40.645537] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req
400000Hz, actual 400000HZ div = 0)
[ 41.004559] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot
req 50000000Hz, actual 50000000HZ div = 0)
[ 41.015553] mmc0: new high speed SDXC card at address 59b4
[ 41.022015] mmcblk0: mmc0:59b4 MS 59.1 GiB
[ 41.028458] mmcblk0: p1 p2

Any help?

[1] https://paste.ubuntu.com/25225486/
[2] https://paste.ubuntu.com/25225915/

thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.

\
 
 \ /
  Last update: 2017-08-02 13:10    [W:0.323 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site