lkml.org 
[lkml]   [2017]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] Documentation: hwmon: Add POWER system power supply documentation
Date
From: "Edward A. James" <eajames@us.ibm.com>

Signed-off-by: Edward A. James <eajames@us.ibm.com>
---
Documentation/hwmon/powerps | 54 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 Documentation/hwmon/powerps

diff --git a/Documentation/hwmon/powerps b/Documentation/hwmon/powerps
new file mode 100644
index 0000000..a4fbe92
--- /dev/null
+++ b/Documentation/hwmon/powerps
@@ -0,0 +1,54 @@
+Kernel driver powerps
+=====================
+
+Supported chips:
+ * POWER system power supply
+
+Author: Eddie James <eajames@us.ibm.com>
+
+Description
+-----------
+
+This driver supports POWER system power supplies. This driver is a client
+to the core PMBus driver.
+
+Usage Notes
+-----------
+
+This driver should auto-detect devices. In the event that it does not, you will
+have to instantiate the devices explicitly. Please see
+Documentation/i2c/instantiating-devices for details.
+
+Sysfs entries
+-------------
+
+The following attributes are supported:
+
+curr1_alarm Output current over-current fault.
+curr1_input Measured output current in mA.
+curr1_label "iout1"
+
+fan1_alarm Fan 1 warning.
+fan1_fault Fan 1 fault.
+fan1_input Fan 1 speed in RPM.
+fan2_alarm Fan 2 warning.
+fan2_fault Fan 2 fault.
+fan2_input Fan 2 speed in RPM.
+
+in1_alarm Input voltage under-voltage fault.
+in1_input Measured input voltage in mV.
+in1_label "vin"
+in2_alarm Output voltage over-voltage fault.
+in2_input Measured output voltage in mV.
+in2_label "vout1"
+
+power1_alarm Input fault.
+power1_input Measured input power in uW.
+power1_label "pin"
+
+temp1_alarm PSU inlet ambient temperature over-temperature fault.
+temp1_input Measured PSU inlet ambient temp in millidegrees C.
+temp2_alarm Secondary rectifier temp over-temperature fault.
+temp2_input Measured secondary rectifier temp in millidegrees C.
+temp3_alarm ORing FET temperature over-temperature fault.
+temp3_input Measured ORing FET temperature in millidegrees C.
--
1.8.3.1
\
 
 \ /
  Last update: 2017-08-11 00:21    [W:0.147 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site