lkml.org 
[lkml]   [2017]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/3] Documentation: hwmon: Add POWER system power supply documentation
On Thu, Aug 10, 2017 at 05:19:46PM -0500, Eddie James wrote:
> From: "Edward A. James" <eajames@us.ibm.com>
>
> Signed-off-by: Edward A. James <eajames@us.ibm.com>
> ---
> Documentation/hwmon/powerps | 54 +++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 54 insertions(+)
> create mode 100644 Documentation/hwmon/powerps
>
> diff --git a/Documentation/hwmon/powerps b/Documentation/hwmon/powerps
> new file mode 100644
> index 0000000..a4fbe92
> --- /dev/null
> +++ b/Documentation/hwmon/powerps
> @@ -0,0 +1,54 @@
> +Kernel driver powerps
> +=====================
> +
> +Supported chips:
> + * POWER system power supply
> +
> +Author: Eddie James <eajames@us.ibm.com>
> +
> +Description
> +-----------
> +
> +This driver supports POWER system power supplies. This driver is a client
> +to the core PMBus driver.
> +
> +Usage Notes
> +-----------
> +
> +This driver should auto-detect devices. In the event that it does not, you will

Not really, unless specified in devicetree or by other means in the kernel.
But the _driver_ won't do it. pmbus drivers don't have detect functions.

> +have to instantiate the devices explicitly. Please see
> +Documentation/i2c/instantiating-devices for details.
> +
> +Sysfs entries
> +-------------
> +
> +The following attributes are supported:
> +
> +curr1_alarm Output current over-current fault.
> +curr1_input Measured output current in mA.
> +curr1_label "iout1"
> +
> +fan1_alarm Fan 1 warning.
> +fan1_fault Fan 1 fault.
> +fan1_input Fan 1 speed in RPM.
> +fan2_alarm Fan 2 warning.
> +fan2_fault Fan 2 fault.
> +fan2_input Fan 2 speed in RPM.
> +
> +in1_alarm Input voltage under-voltage fault.
> +in1_input Measured input voltage in mV.
> +in1_label "vin"
> +in2_alarm Output voltage over-voltage fault.
> +in2_input Measured output voltage in mV.
> +in2_label "vout1"
> +
> +power1_alarm Input fault.
> +power1_input Measured input power in uW.
> +power1_label "pin"
> +
> +temp1_alarm PSU inlet ambient temperature over-temperature fault.
> +temp1_input Measured PSU inlet ambient temp in millidegrees C.
> +temp2_alarm Secondary rectifier temp over-temperature fault.
> +temp2_input Measured secondary rectifier temp in millidegrees C.
> +temp3_alarm ORing FET temperature over-temperature fault.
> +temp3_input Measured ORing FET temperature in millidegrees C.
> --
> 1.8.3.1
>

\
 
 \ /
  Last update: 2017-08-11 03:20    [W:0.089 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site