lkml.org 
[lkml]   [2017]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] net: stmmac: Detect PHY location with phy-is-integrated
Date
Hello

The current way to find if the phy is internal is to compare DT phy-mode
and emac_variant/internal_phy.
But it will negate a possible future SoC where an external PHY use the
same phy mode than the internal one.

This patchs series adds a new way to find if the PHY is internal, via
the phy-is-integrated DT property.

The first and third patch should go via the net tree.
the second via the sunxi tree.

Thanks
Regards

Corentin Labbe (3):
Documentation: bindings: Add documentation for phy-is-integrated
ARM: sun8i: sunxi-h3-h5: add phy-is-integrated property to internal
PHY
net: stmmac: dwmac-sun8i: choose internal PHY via phy-is-integrated

Documentation/devicetree/bindings/net/phy.txt | 4 ++++
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 1 +
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 16 ++++++++--------
3 files changed, 13 insertions(+), 8 deletions(-)

--
2.13.0

\
 
 \ /
  Last update: 2017-08-10 10:54    [W:0.257 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site