Messages in this thread | | | From | Claudiu Beznea <> | Subject | [PATCH v2 0/5] Add SoM1 support | Date | Mon, 3 Jul 2017 15:56:07 +0300 |
| |
Hi all,
This series adds support for sama5d2 SoM1 devices.
The at91-sama5d27_som1.dtsi add specific bindings for SoM1 board. The at91-sama5d27_som1_ek.dts add specific bindings for SoM1 EK board.
The sama5d27_som1_ek uses a EEPROM binding, "start-offset", which is introduced in patch series: "[RFC PATCH 0/3] Add at24 functionality to read form different EEPROM offsets".
Thank you, Claudiu
Changes in v2: o in at91-sama5d27_som1.dtsi: - increase bootloader and kernel size in flash map (with bootloader flash offset the dtb and kernel flash offsets were changed) - use right pin for ethernet-phy interrupt
o in at91-sama5d27_som1_ek.dts: - removed memory tag and rely on bootloader to fill the right value - use pin macros (from arch/arm/boot/dts/sama5d2-pinfunc.h) wherever posible instead of pin numbers - remove pinctrl_sensor_power and pinctrl_sensor_reset pin muxing since they are not of intereset for this board - use "pb4" label for user button instead of "bp1"
Claudiu Beznea (2): ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support ARM: dts: sama5d27_som1_ek: Add sama5d27 SoM1 EK support
Cristian Birsan (1): drivers: soc: atmel: Add basic support for new sama5d2 SiPs
Cyrille Pitchen (1): ARM: dts: at91: sama5d2: add QSPI nodes
Songjun Wu (1): ARM: dts: at91: sama5d2: add isc node
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 178 +++++++++ arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 551 ++++++++++++++++++++++++++++ arch/arm/boot/dts/sama5d2.dtsi | 38 ++ drivers/soc/atmel/soc.c | 8 + drivers/soc/atmel/soc.h | 4 + 6 files changed, 780 insertions(+) create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1.dtsi create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
-- 2.7.4
| |