lkml.org 
[lkml]   [2017]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 09/23] media: camss: Add ISPIF files
Hi Todor,

On Mon, Jul 17, 2017 at 01:33:35PM +0300, Todor Tomov wrote:
> These files control the ISPIF module which handles the routing of the data
> streams from the CSIDs to the inputs of the VFE.
>
> Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
> ---
> .../media/platform/qcom/camss-8x16/camss-ispif.c | 1127 ++++++++++++++++++++
> .../media/platform/qcom/camss-8x16/camss-ispif.h | 85 ++
> 2 files changed, 1212 insertions(+)
> create mode 100644 drivers/media/platform/qcom/camss-8x16/camss-ispif.c
> create mode 100644 drivers/media/platform/qcom/camss-8x16/camss-ispif.h
>
> diff --git a/drivers/media/platform/qcom/camss-8x16/camss-ispif.c b/drivers/media/platform/qcom/camss-8x16/camss-ispif.c
> new file mode 100644
> index 0000000..cc32085
> --- /dev/null
> +++ b/drivers/media/platform/qcom/camss-8x16/camss-ispif.c
> @@ -0,0 +1,1127 @@
> +/*
> + * camss-ispif.c
> + *
> + * Qualcomm MSM Camera Subsystem - ISPIF Module
> + *
> + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
> + * Copyright (C) 2015-2017 Linaro Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#include <linux/clk.h>
> +#include <linux/completion.h>
> +#include <linux/interrupt.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-subdev.h>
> +
> +#include "camss-ispif.h"
> +#include "camss.h"
> +
> +#define MSM_ISPIF_NAME "msm_ispif"
> +
> +#define ispif_line_array(ptr_line) \
> + ((const struct ispif_line (*)[]) &(ptr_line[-(ptr_line->id)]))

Argh.

> +
> +#define to_ispif(ptr_line) \
> + container_of(ispif_line_array(ptr_line), struct ispif_device, ptr_line)
> +
> +#define ISPIF_RST_CMD_0 0x008
> +#define ISPIF_IRQ_GLOBAL_CLEAR_CMD 0x01c
> +#define ISPIF_VFE_m_CTRL_0(m) (0x200 + 0x200 * (m))
> +#define ISPIF_VFE_m_CTRL_0_PIX0_LINE_BUF_EN (1 << 6)
> +#define ISPIF_VFE_m_IRQ_MASK_0(m) (0x208 + 0x200 * (m))
> +#define ISPIF_VFE_m_IRQ_MASK_0_PIX0_ENABLE 0x00001249
> +#define ISPIF_VFE_m_IRQ_MASK_0_PIX0_MASK 0x00001fff
> +#define ISPIF_VFE_m_IRQ_MASK_0_RDI0_ENABLE 0x02492000
> +#define ISPIF_VFE_m_IRQ_MASK_0_RDI0_MASK 0x03ffe000
> +#define ISPIF_VFE_m_IRQ_MASK_1(m) (0x20c + 0x200 * (m))
> +#define ISPIF_VFE_m_IRQ_MASK_1_PIX1_ENABLE 0x00001249
> +#define ISPIF_VFE_m_IRQ_MASK_1_PIX1_MASK 0x00001fff
> +#define ISPIF_VFE_m_IRQ_MASK_1_RDI1_ENABLE 0x02492000
> +#define ISPIF_VFE_m_IRQ_MASK_1_RDI1_MASK 0x03ffe000
> +#define ISPIF_VFE_m_IRQ_MASK_2(m) (0x210 + 0x200 * (m))
> +#define ISPIF_VFE_m_IRQ_MASK_2_RDI2_ENABLE 0x00001249
> +#define ISPIF_VFE_m_IRQ_MASK_2_RDI2_MASK 0x00001fff
> +#define ISPIF_VFE_m_IRQ_STATUS_0(m) (0x21c + 0x200 * (m))
> +#define ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW (1 << 12)
> +#define ISPIF_VFE_m_IRQ_STATUS_0_RDI0_OVERFLOW (1 << 25)
> +#define ISPIF_VFE_m_IRQ_STATUS_1(m) (0x220 + 0x200 * (m))
> +#define ISPIF_VFE_m_IRQ_STATUS_1_PIX1_OVERFLOW (1 << 12)
> +#define ISPIF_VFE_m_IRQ_STATUS_1_RDI1_OVERFLOW (1 << 25)
> +#define ISPIF_VFE_m_IRQ_STATUS_2(m) (0x224 + 0x200 * (m))
> +#define ISPIF_VFE_m_IRQ_STATUS_2_RDI2_OVERFLOW (1 << 12)
> +#define ISPIF_VFE_m_IRQ_CLEAR_0(m) (0x230 + 0x200 * (m))
> +#define ISPIF_VFE_m_IRQ_CLEAR_1(m) (0x234 + 0x200 * (m))
> +#define ISPIF_VFE_m_IRQ_CLEAR_2(m) (0x238 + 0x200 * (m))
> +#define ISPIF_VFE_m_INTF_INPUT_SEL(m) (0x244 + 0x200 * (m))
> +#define ISPIF_VFE_m_INTF_CMD_0(m) (0x248 + 0x200 * (m))
> +#define ISPIF_VFE_m_INTF_CMD_1(m) (0x24c + 0x200 * (m))
> +#define ISPIF_VFE_m_PIX_INTF_n_CID_MASK(m, n) \
> + (0x254 + 0x200 * (m) + 0x4 * (n))
> +#define ISPIF_VFE_m_RDI_INTF_n_CID_MASK(m, n) \
> + (0x264 + 0x200 * (m) + 0x4 * (n))
> +#define ISPIF_VFE_m_PIX_INTF_n_STATUS(m, n) \
> + (0x2c0 + 0x200 * (m) + 0x4 * (n))
> +#define ISPIF_VFE_m_RDI_INTF_n_STATUS(m, n) \
> + (0x2d0 + 0x200 * (m) + 0x4 * (n))
> +
> +#define CSI_PIX_CLK_MUX_SEL 0x000
> +#define CSI_RDI_CLK_MUX_SEL 0x008
> +
> +#define ISPIF_TIMEOUT_SLEEP_US 1000
> +#define ISPIF_TIMEOUT_ALL_US 1000000
> +#define ISPIF_RESET_TIMEOUT_MS 500
> +
> +enum ispif_intf_cmd {
> + CMD_DISABLE_FRAME_BOUNDARY = 0x0,
> + CMD_ENABLE_FRAME_BOUNDARY = 0x1,
> + CMD_DISABLE_IMMEDIATELY = 0x2,
> + CMD_ALL_DISABLE_IMMEDIATELY = 0xaaaaaaaa,
> + CMD_ALL_NO_CHANGE = 0xffffffff,
> +};
> +
> +static const u32 ispif_formats[] = {
> + MEDIA_BUS_FMT_UYVY8_2X8,
> + MEDIA_BUS_FMT_VYUY8_2X8,
> + MEDIA_BUS_FMT_YUYV8_2X8,
> + MEDIA_BUS_FMT_YVYU8_2X8,
> + MEDIA_BUS_FMT_SBGGR8_1X8,
> + MEDIA_BUS_FMT_SGBRG8_1X8,
> + MEDIA_BUS_FMT_SGRBG8_1X8,
> + MEDIA_BUS_FMT_SRGGB8_1X8,
> + MEDIA_BUS_FMT_SBGGR10_1X10,
> + MEDIA_BUS_FMT_SGBRG10_1X10,
> + MEDIA_BUS_FMT_SGRBG10_1X10,
> + MEDIA_BUS_FMT_SRGGB10_1X10,
> + MEDIA_BUS_FMT_SBGGR12_1X12,
> + MEDIA_BUS_FMT_SGBRG12_1X12,
> + MEDIA_BUS_FMT_SGRBG12_1X12,
> + MEDIA_BUS_FMT_SRGGB12_1X12,
> +};
> +
> +/*
> + * ispif_isr - ISPIF module interrupt handler
> + * @irq: Interrupt line
> + * @dev: ISPIF device
> + *
> + * Return IRQ_HANDLED on success
> + */
> +static irqreturn_t ispif_isr(int irq, void *dev)
> +{
> + struct ispif_device *ispif = dev;
> + u32 value0, value1, value2;
> +
> + value0 = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_STATUS_0(0));
> + value1 = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_STATUS_1(0));
> + value2 = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_STATUS_2(0));
> +
> + writel_relaxed(value0, ispif->base + ISPIF_VFE_m_IRQ_CLEAR_0(0));
> + writel_relaxed(value1, ispif->base + ISPIF_VFE_m_IRQ_CLEAR_1(0));
> + writel_relaxed(value2, ispif->base + ISPIF_VFE_m_IRQ_CLEAR_2(0));
> +
> + writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
> +
> + if ((value0 >> 27) & 0x1)
> + complete(&ispif->reset_complete);
> +
> + if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
> + dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
> +
> + if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_RDI0_OVERFLOW))
> + dev_err_ratelimited(to_device(ispif), "VFE0 rdi0 overflow\n");
> +
> + if (unlikely(value1 & ISPIF_VFE_m_IRQ_STATUS_1_PIX1_OVERFLOW))
> + dev_err_ratelimited(to_device(ispif), "VFE0 pix1 overflow\n");
> +
> + if (unlikely(value1 & ISPIF_VFE_m_IRQ_STATUS_1_RDI1_OVERFLOW))
> + dev_err_ratelimited(to_device(ispif), "VFE0 rdi1 overflow\n");
> +
> + if (unlikely(value2 & ISPIF_VFE_m_IRQ_STATUS_2_RDI2_OVERFLOW))
> + dev_err_ratelimited(to_device(ispif), "VFE0 rdi2 overflow\n");
> +
> + return IRQ_HANDLED;
> +}
> +
> +/*
> + * ispif_reset - Trigger reset on ISPIF module and wait to complete
> + * @ispif: ISPIF device
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +static int ispif_reset(struct ispif_device *ispif)
> +{
> + unsigned long time;
> + int ret;
> +
> + ret = camss_enable_clocks(ispif->nclocks_for_reset,
> + ispif->clock_for_reset,
> + to_device(ispif));
> + if (ret < 0)
> + return ret;
> +
> + reinit_completion(&ispif->reset_complete);
> +
> + writel_relaxed(0x000f1fff, ispif->base + ISPIF_RST_CMD_0);

Bit definitions for the register would be nice, rather than a magic value.

> +
> + time = wait_for_completion_timeout(&ispif->reset_complete,
> + msecs_to_jiffies(ISPIF_RESET_TIMEOUT_MS));
> + if (!time) {
> + dev_err(to_device(ispif), "ISPIF reset timeout\n");
> + return -EIO;
> + }
> +
> + camss_disable_clocks(ispif->nclocks_for_reset, ispif->clock_for_reset);
> +
> + return 0;
> +}
> +
> +/*
> + * ispif_set_power - Power on/off ISPIF module
> + * @sd: ISPIF V4L2 subdevice
> + * @on: Requested power state
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +static int ispif_set_power(struct v4l2_subdev *sd, int on)
> +{
> + struct ispif_line *line = v4l2_get_subdevdata(sd);
> + struct ispif_device *ispif = to_ispif(line);
> + struct device *dev = to_device(ispif);
> + int ret = 0;
> +
> + mutex_lock(&ispif->power_lock);
> +
> + if (on) {
> + if (ispif->power_count) {
> + /* Power is already on */
> + ispif->power_count++;
> + goto exit;
> + }
> +
> + ret = camss_enable_clocks(ispif->nclocks, ispif->clock, dev);
> + if (ret < 0)
> + goto exit;
> +
> + ret = ispif_reset(ispif);
> + if (ret < 0) {
> + camss_disable_clocks(ispif->nclocks, ispif->clock);
> + goto exit;
> + }
> +
> + ispif->intf_cmd[line->vfe_id].cmd_0 = CMD_ALL_NO_CHANGE;
> + ispif->intf_cmd[line->vfe_id].cmd_1 = CMD_ALL_NO_CHANGE;
> +
> + ispif->power_count++;
> + } else {
> + if (ispif->power_count == 0) {
> + dev_err(dev, "ispif power off on power_count == 0\n");
> + goto exit;
> + } else if (ispif->power_count == 1) {
> + camss_disable_clocks(ispif->nclocks, ispif->clock);
> + }
> +
> + ispif->power_count--;
> + }
> +
> +exit:
> + mutex_unlock(&ispif->power_lock);
> +
> + return ret;
> +}
> +
> +/*
> + * ispif_select_clk_mux - Select clock for PIX/RDI interface
> + * @ispif: ISPIF device
> + * @intf: VFE interface
> + * @csid: CSID HW module id
> + * @vfe: VFE HW module id
> + * @enable: enable or disable the selected clock
> + */
> +static void ispif_select_clk_mux(struct ispif_device *ispif,
> + enum ispif_intf intf, u8 csid,
> + u8 vfe, u8 enable)
> +{
> + u32 val;
> +
> + switch (intf) {
> + case PIX0:
> + val = readl_relaxed(ispif->base_clk_mux + CSI_PIX_CLK_MUX_SEL);
> + val &= ~(0xf << (vfe * 8));
> + if (enable)
> + val |= (csid << (vfe * 8));
> + writel_relaxed(val, ispif->base_clk_mux + CSI_PIX_CLK_MUX_SEL);
> + break;
> +
> + case RDI0:
> + val = readl_relaxed(ispif->base_clk_mux + CSI_RDI_CLK_MUX_SEL);
> + val &= ~(0xf << (vfe * 12));
> + if (enable)
> + val |= (csid << (vfe * 12));
> + writel_relaxed(val, ispif->base_clk_mux + CSI_RDI_CLK_MUX_SEL);
> + break;
> +
> + case PIX1:
> + val = readl_relaxed(ispif->base_clk_mux + CSI_PIX_CLK_MUX_SEL);
> + val &= ~(0xf << (4 + (vfe * 8)));
> + if (enable)
> + val |= (csid << (4 + (vfe * 8)));
> + writel_relaxed(val, ispif->base_clk_mux + CSI_PIX_CLK_MUX_SEL);
> + break;
> +
> + case RDI1:
> + val = readl_relaxed(ispif->base_clk_mux + CSI_RDI_CLK_MUX_SEL);
> + val &= ~(0xf << (4 + (vfe * 12)));
> + if (enable)
> + val |= (csid << (4 + (vfe * 12)));
> + writel_relaxed(val, ispif->base_clk_mux + CSI_RDI_CLK_MUX_SEL);
> + break;
> +
> + case RDI2:
> + val = readl_relaxed(ispif->base_clk_mux + CSI_RDI_CLK_MUX_SEL);
> + val &= ~(0xf << (8 + (vfe * 12)));
> + if (enable)
> + val |= (csid << (8 + (vfe * 12)));
> + writel_relaxed(val, ispif->base_clk_mux + CSI_RDI_CLK_MUX_SEL);
> + break;
> + }
> +
> + mb();
> +}
> +
> +/*
> + * ispif_validate_intf_status - Validate current status of PIX/RDI interface
> + * @ispif: ISPIF device
> + * @intf: VFE interface
> + * @vfe: VFE HW module id
> + *
> + * Return 0 when interface is idle or -EBUSY otherwise
> + */
> +static int ispif_validate_intf_status(struct ispif_device *ispif,
> + enum ispif_intf intf, u8 vfe)
> +{
> + int ret = 0;
> + u32 val = 0;
> +
> + switch (intf) {
> + case PIX0:
> + val = readl_relaxed(ispif->base +
> + ISPIF_VFE_m_PIX_INTF_n_STATUS(vfe, 0));
> + break;
> + case RDI0:
> + val = readl_relaxed(ispif->base +
> + ISPIF_VFE_m_RDI_INTF_n_STATUS(vfe, 0));
> + break;
> + case PIX1:
> + val = readl_relaxed(ispif->base +
> + ISPIF_VFE_m_PIX_INTF_n_STATUS(vfe, 1));
> + break;
> + case RDI1:
> + val = readl_relaxed(ispif->base +
> + ISPIF_VFE_m_RDI_INTF_n_STATUS(vfe, 1));
> + break;
> + case RDI2:
> + val = readl_relaxed(ispif->base +
> + ISPIF_VFE_m_RDI_INTF_n_STATUS(vfe, 2));
> + break;
> + }
> +
> + if ((val & 0xf) != 0xf) {
> + dev_err(to_device(ispif), "%s: ispif is busy: 0x%x\n",
> + __func__, val);
> + ret = -EBUSY;
> + }
> +
> + return ret;
> +}
> +
> +/*
> + * ispif_wait_for_stop - Wait for PIX/RDI interface to stop
> + * @ispif: ISPIF device
> + * @intf: VFE interface
> + * @vfe: VFE HW module id
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +static int ispif_wait_for_stop(struct ispif_device *ispif,
> + enum ispif_intf intf, u8 vfe)
> +{
> + u32 addr = 0;
> + u32 stop_flag = 0;
> + int ret;
> +
> + switch (intf) {
> + case PIX0:
> + addr = ISPIF_VFE_m_PIX_INTF_n_STATUS(vfe, 0);
> + break;
> + case RDI0:
> + addr = ISPIF_VFE_m_RDI_INTF_n_STATUS(vfe, 0);
> + break;
> + case PIX1:
> + addr = ISPIF_VFE_m_PIX_INTF_n_STATUS(vfe, 1);
> + break;
> + case RDI1:
> + addr = ISPIF_VFE_m_RDI_INTF_n_STATUS(vfe, 1);
> + break;
> + case RDI2:
> + addr = ISPIF_VFE_m_RDI_INTF_n_STATUS(vfe, 2);
> + break;
> + }
> +
> + ret = readl_poll_timeout(ispif->base + addr,
> + stop_flag,
> + (stop_flag & 0xf) == 0xf,
> + ISPIF_TIMEOUT_SLEEP_US,
> + ISPIF_TIMEOUT_ALL_US);
> + if (ret < 0)
> + dev_err(to_device(ispif), "%s: ispif stop timeout\n",
> + __func__);
> +
> + return ret;
> +}
> +
> +/*
> + * ispif_select_csid - Select CSID HW module for input from
> + * @ispif: ISPIF device
> + * @intf: VFE interface
> + * @csid: CSID HW module id
> + * @vfe: VFE HW module id
> + * @enable: enable or disable the selected input
> + */
> +static void ispif_select_csid(struct ispif_device *ispif, enum ispif_intf intf,
> + u8 csid, u8 vfe, u8 enable)
> +{
> + u32 val;
> +
> + val = readl_relaxed(ispif->base + ISPIF_VFE_m_INTF_INPUT_SEL(vfe));
> + switch (intf) {
> + case PIX0:
> + val &= ~(BIT(1) | BIT(0));
> + if (enable)
> + val |= csid;
> + break;
> + case RDI0:
> + val &= ~(BIT(5) | BIT(4));
> + if (enable)
> + val |= (csid << 4);
> + break;
> + case PIX1:
> + val &= ~(BIT(9) | BIT(8));
> + if (enable)
> + val |= (csid << 8);
> + break;
> + case RDI1:
> + val &= ~(BIT(13) | BIT(12));
> + if (enable)
> + val |= (csid << 12);
> + break;
> + case RDI2:
> + val &= ~(BIT(21) | BIT(20));
> + if (enable)
> + val |= (csid << 20);
> + break;
> + }
> +
> + writel(val, ispif->base + ISPIF_VFE_m_INTF_INPUT_SEL(vfe));
> +}
> +
> +/*
> + * ispif_select_cid - Enable/disable desired CID
> + * @ispif: ISPIF device
> + * @intf: VFE interface
> + * @cid: desired CID to enable/disable
> + * @vfe: VFE HW module id
> + * @enable: enable or disable the desired CID
> + */
> +static void ispif_select_cid(struct ispif_device *ispif, enum ispif_intf intf,
> + u8 cid, u8 vfe, u8 enable)
> +{
> + u32 cid_mask = 1 << cid;
> + u32 addr = 0;
> + u32 val;
> +
> + switch (intf) {
> + case PIX0:
> + addr = ISPIF_VFE_m_PIX_INTF_n_CID_MASK(vfe, 0);
> + break;
> + case RDI0:
> + addr = ISPIF_VFE_m_RDI_INTF_n_CID_MASK(vfe, 0);
> + break;
> + case PIX1:
> + addr = ISPIF_VFE_m_PIX_INTF_n_CID_MASK(vfe, 1);
> + break;
> + case RDI1:
> + addr = ISPIF_VFE_m_RDI_INTF_n_CID_MASK(vfe, 1);
> + break;
> + case RDI2:
> + addr = ISPIF_VFE_m_RDI_INTF_n_CID_MASK(vfe, 2);
> + break;
> + }
> +
> + val = readl_relaxed(ispif->base + addr);
> + if (enable)
> + val |= cid_mask;
> + else
> + val &= ~cid_mask;
> +
> + writel(val, ispif->base + addr);
> +}
> +
> +/*
> + * ispif_config_irq - Enable/disable interrupts for PIX/RDI interface
> + * @ispif: ISPIF device
> + * @intf: VFE interface
> + * @vfe: VFE HW module id
> + * @enable: enable or disable
> + */
> +static void ispif_config_irq(struct ispif_device *ispif, enum ispif_intf intf,
> + u8 vfe, u8 enable)
> +{
> + u32 val;
> +
> + switch (intf) {
> + case PIX0:
> + val = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_MASK_0(vfe));
> + val &= ~ISPIF_VFE_m_IRQ_MASK_0_PIX0_MASK;
> + if (enable)
> + val |= ISPIF_VFE_m_IRQ_MASK_0_PIX0_ENABLE;
> + writel_relaxed(val, ispif->base + ISPIF_VFE_m_IRQ_MASK_0(vfe));
> + writel_relaxed(ISPIF_VFE_m_IRQ_MASK_0_PIX0_ENABLE,
> + ispif->base + ISPIF_VFE_m_IRQ_CLEAR_0(vfe));
> + break;
> + case RDI0:
> + val = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_MASK_0(vfe));
> + val &= ~ISPIF_VFE_m_IRQ_MASK_0_RDI0_MASK;
> + if (enable)
> + val |= ISPIF_VFE_m_IRQ_MASK_0_RDI0_ENABLE;
> + writel_relaxed(val, ispif->base + ISPIF_VFE_m_IRQ_MASK_0(vfe));
> + writel_relaxed(ISPIF_VFE_m_IRQ_MASK_0_RDI0_ENABLE,
> + ispif->base + ISPIF_VFE_m_IRQ_CLEAR_0(vfe));
> + break;
> + case PIX1:
> + val = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_MASK_1(vfe));
> + val &= ~ISPIF_VFE_m_IRQ_MASK_1_PIX1_MASK;
> + if (enable)
> + val |= ISPIF_VFE_m_IRQ_MASK_1_PIX1_ENABLE;
> + writel_relaxed(val, ispif->base + ISPIF_VFE_m_IRQ_MASK_1(vfe));
> + writel_relaxed(ISPIF_VFE_m_IRQ_MASK_1_PIX1_ENABLE,
> + ispif->base + ISPIF_VFE_m_IRQ_CLEAR_1(vfe));
> + break;
> + case RDI1:
> + val = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_MASK_1(vfe));
> + val &= ~ISPIF_VFE_m_IRQ_MASK_1_RDI1_MASK;
> + if (enable)
> + val |= ISPIF_VFE_m_IRQ_MASK_1_RDI1_ENABLE;
> + writel_relaxed(val, ispif->base + ISPIF_VFE_m_IRQ_MASK_1(vfe));
> + writel_relaxed(ISPIF_VFE_m_IRQ_MASK_1_RDI1_ENABLE,
> + ispif->base + ISPIF_VFE_m_IRQ_CLEAR_1(vfe));
> + break;
> + case RDI2:
> + val = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_MASK_2(vfe));
> + val &= ~ISPIF_VFE_m_IRQ_MASK_2_RDI2_MASK;
> + if (enable)
> + val |= ISPIF_VFE_m_IRQ_MASK_2_RDI2_ENABLE;
> + writel_relaxed(val, ispif->base + ISPIF_VFE_m_IRQ_MASK_2(vfe));
> + writel_relaxed(ISPIF_VFE_m_IRQ_MASK_2_RDI2_ENABLE,
> + ispif->base + ISPIF_VFE_m_IRQ_CLEAR_2(vfe));
> + break;
> + }
> +
> + writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
> +}
> +
> +/*
> + * ispif_set_intf_cmd - Set command to enable/disable interface
> + * @ispif: ISPIF device
> + * @cmd: interface command
> + * @intf: VFE interface
> + * @vfe: VFE HW module id
> + * @vc: virtual channel
> + */
> +static void ispif_set_intf_cmd(struct ispif_device *ispif, u8 cmd,
> + enum ispif_intf intf, u8 vfe, u8 vc)
> +{
> + u32 *val;
> +
> + if (intf == RDI2) {
> + val = &ispif->intf_cmd[vfe].cmd_1;
> + *val &= ~(0x3 << (vc * 2 + 8));
> + *val |= (cmd << (vc * 2 + 8));
> + wmb();
> + writel_relaxed(*val, ispif->base + ISPIF_VFE_m_INTF_CMD_1(vfe));
> + wmb();
> + } else {
> + val = &ispif->intf_cmd[vfe].cmd_0;
> + *val &= ~(0x3 << (vc * 2 + intf * 8));
> + *val |= (cmd << (vc * 2 + intf * 8));
> + wmb();
> + writel_relaxed(*val, ispif->base + ISPIF_VFE_m_INTF_CMD_0(vfe));
> + wmb();
> + }
> +}
> +
> +/*
> + * ispif_set_stream - Enable/disable streaming on ISPIF module
> + * @sd: ISPIF V4L2 subdevice
> + * @enable: Requested streaming state
> + *
> + * Main configuration of ISPIF module is also done here.
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +static int ispif_set_stream(struct v4l2_subdev *sd, int enable)
> +{
> + struct ispif_line *line = v4l2_get_subdevdata(sd);
> + struct ispif_device *ispif = to_ispif(line);
> + enum ispif_intf intf = line->interface;
> + u8 csid = line->csid_id;
> + u8 vfe = line->vfe_id;
> + u8 vc = 0; /* Virtual Channel 0 */
> + u8 cid = vc * 4;
> + int ret;
> +
> + if (enable) {
> + if (!media_entity_remote_pad(
> + &line->pads[MSM_ISPIF_PAD_SINK])) {

Extra braces.

> + return -ENOLINK;
> + }
> +
> + /* Config */
> +
> + mutex_lock(&ispif->config_lock);
> + ispif_select_clk_mux(ispif, intf, csid, vfe, 1);
> +
> + ret = ispif_validate_intf_status(ispif, intf, vfe);
> + if (ret < 0) {
> + mutex_unlock(&ispif->config_lock);
> + return ret;
> + }
> +
> + ispif_select_csid(ispif, intf, csid, vfe, 1);
> + ispif_select_cid(ispif, intf, cid, vfe, 1);
> + ispif_config_irq(ispif, intf, vfe, 1);
> + ispif_set_intf_cmd(ispif, CMD_ENABLE_FRAME_BOUNDARY,
> + intf, vfe, vc);
> + } else {
> + mutex_lock(&ispif->config_lock);
> + ispif_set_intf_cmd(ispif, CMD_DISABLE_FRAME_BOUNDARY,
> + intf, vfe, vc);
> + mutex_unlock(&ispif->config_lock);
> +
> + ret = ispif_wait_for_stop(ispif, intf, vfe);
> + if (ret < 0)
> + return ret;
> +
> + mutex_lock(&ispif->config_lock);
> + ispif_config_irq(ispif, intf, vfe, 0);
> + ispif_select_cid(ispif, intf, cid, vfe, 0);
> + ispif_select_csid(ispif, intf, csid, vfe, 0);
> + ispif_select_clk_mux(ispif, intf, csid, vfe, 0);
> + }
> +
> + mutex_unlock(&ispif->config_lock);
> +
> + return 0;
> +}
> +
> +/*
> + * __ispif_get_format - Get pointer to format structure
> + * @ispif: ISPIF line
> + * @cfg: V4L2 subdev pad configuration
> + * @pad: pad from which format is requested
> + * @which: TRY or ACTIVE format
> + *
> + * Return pointer to TRY or ACTIVE format structure
> + */
> +static struct v4l2_mbus_framefmt *
> +__ispif_get_format(struct ispif_line *line,
> + struct v4l2_subdev_pad_config *cfg,
> + unsigned int pad,
> + enum v4l2_subdev_format_whence which)
> +{
> + if (which == V4L2_SUBDEV_FORMAT_TRY)
> + return v4l2_subdev_get_try_format(&line->subdev, cfg, pad);
> +
> + return &line->fmt[pad];
> +}
> +
> +/*
> + * ispif_try_format - Handle try format by pad subdev method
> + * @ispif: ISPIF line
> + * @cfg: V4L2 subdev pad configuration
> + * @pad: pad on which format is requested
> + * @fmt: pointer to v4l2 format structure
> + * @which: wanted subdev format
> + */
> +static void ispif_try_format(struct ispif_line *line,
> + struct v4l2_subdev_pad_config *cfg,
> + unsigned int pad,
> + struct v4l2_mbus_framefmt *fmt,
> + enum v4l2_subdev_format_whence which)
> +{
> + unsigned int i;
> +
> + switch (pad) {
> + case MSM_ISPIF_PAD_SINK:
> + /* Set format on sink pad */
> +
> + for (i = 0; i < ARRAY_SIZE(ispif_formats); i++)
> + if (fmt->code == ispif_formats[i])
> + break;
> +
> + /* If not found, use UYVY as default */
> + if (i >= ARRAY_SIZE(ispif_formats))
> + fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
> +
> + fmt->width = clamp_t(u32, fmt->width, 1, 8191);
> + fmt->height = clamp_t(u32, fmt->height, 1, 8191);
> +
> + if (fmt->field == V4L2_FIELD_ANY)
> + fmt->field = V4L2_FIELD_NONE;
> +
> + break;
> +
> + case MSM_ISPIF_PAD_SRC:
> + /* Set and return a format same as sink pad */
> +
> + *fmt = *__ispif_get_format(line, cfg, MSM_ISPIF_PAD_SINK,
> + which);
> +
> + break;
> + }
> +
> + fmt->colorspace = V4L2_COLORSPACE_SRGB;
> +}
> +
> +/*
> + * ispif_enum_mbus_code - Handle pixel format enumeration
> + * @sd: ISPIF V4L2 subdevice
> + * @cfg: V4L2 subdev pad configuration
> + * @code: pointer to v4l2_subdev_mbus_code_enum structure
> + * return -EINVAL or zero on success
> + */
> +static int ispif_enum_mbus_code(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_mbus_code_enum *code)
> +{
> + struct ispif_line *line = v4l2_get_subdevdata(sd);
> + struct v4l2_mbus_framefmt *format;
> +
> + if (code->pad == MSM_ISPIF_PAD_SINK) {
> + if (code->index >= ARRAY_SIZE(ispif_formats))
> + return -EINVAL;
> +
> + code->code = ispif_formats[code->index];
> + } else {
> + if (code->index > 0)
> + return -EINVAL;
> +
> + format = __ispif_get_format(line, cfg, MSM_ISPIF_PAD_SINK,
> + code->which);
> +
> + code->code = format->code;
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * ispif_enum_frame_size - Handle frame size enumeration
> + * @sd: ISPIF V4L2 subdevice
> + * @cfg: V4L2 subdev pad configuration
> + * @fse: pointer to v4l2_subdev_frame_size_enum structure
> + * return -EINVAL or zero on success
> + */
> +static int ispif_enum_frame_size(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_frame_size_enum *fse)
> +{
> + struct ispif_line *line = v4l2_get_subdevdata(sd);
> + struct v4l2_mbus_framefmt format;
> +
> + if (fse->index != 0)
> + return -EINVAL;
> +
> + format.code = fse->code;
> + format.width = 1;
> + format.height = 1;
> + ispif_try_format(line, cfg, fse->pad, &format, fse->which);
> + fse->min_width = format.width;
> + fse->min_height = format.height;
> +
> + if (format.code != fse->code)
> + return -EINVAL;
> +
> + format.code = fse->code;
> + format.width = -1;
> + format.height = -1;
> + ispif_try_format(line, cfg, fse->pad, &format, fse->which);
> + fse->max_width = format.width;
> + fse->max_height = format.height;
> +
> + return 0;
> +}
> +
> +/*
> + * ispif_get_format - Handle get format by pads subdev method
> + * @sd: ISPIF V4L2 subdevice
> + * @cfg: V4L2 subdev pad configuration
> + * @fmt: pointer to v4l2 subdev format structure
> + *
> + * Return -EINVAL or zero on success
> + */
> +static int ispif_get_format(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *fmt)
> +{
> + struct ispif_line *line = v4l2_get_subdevdata(sd);
> + struct v4l2_mbus_framefmt *format;
> +
> + format = __ispif_get_format(line, cfg, fmt->pad, fmt->which);
> + if (format == NULL)
> + return -EINVAL;
> +
> + fmt->format = *format;
> +
> + return 0;
> +}
> +
> +/*
> + * ispif_set_format - Handle set format by pads subdev method
> + * @sd: ISPIF V4L2 subdevice
> + * @cfg: V4L2 subdev pad configuration
> + * @fmt: pointer to v4l2 subdev format structure
> + *
> + * Return -EINVAL or zero on success
> + */
> +static int ispif_set_format(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *fmt)
> +{
> + struct ispif_line *line = v4l2_get_subdevdata(sd);
> + struct v4l2_mbus_framefmt *format;
> +
> + format = __ispif_get_format(line, cfg, fmt->pad, fmt->which);
> + if (format == NULL)
> + return -EINVAL;
> +
> + ispif_try_format(line, cfg, fmt->pad, &fmt->format, fmt->which);
> + *format = fmt->format;
> +
> + /* Propagate the format from sink to source */
> + if (fmt->pad == MSM_ISPIF_PAD_SINK) {
> + format = __ispif_get_format(line, cfg, MSM_ISPIF_PAD_SRC,
> + fmt->which);
> +
> + *format = fmt->format;
> + ispif_try_format(line, cfg, MSM_ISPIF_PAD_SRC, format,
> + fmt->which);
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * ispif_init_formats - Initialize formats on all pads
> + * @sd: ISPIF V4L2 subdevice
> + * @fh: V4L2 subdev file handle
> + *
> + * Initialize all pad formats with default values.
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +static int ispif_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> +{
> + struct v4l2_subdev_format format = {
> + .pad = MSM_ISPIF_PAD_SINK,
> + .which = fh ? V4L2_SUBDEV_FORMAT_TRY :
> + V4L2_SUBDEV_FORMAT_ACTIVE,
> + .format = {
> + .code = MEDIA_BUS_FMT_UYVY8_2X8,
> + .width = 1920,
> + .height = 1080
> + }
> + };
> +
> + return ispif_set_format(sd, fh ? fh->pad : NULL, &format);
> +}
> +
> +/*
> + * msm_ispif_subdev_init - Initialize ISPIF device structure and resources
> + * @ispif: ISPIF device
> + * @res: ISPIF module resources table
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +int msm_ispif_subdev_init(struct ispif_device *ispif,
> + const struct resources_ispif *res)
> +{
> + struct device *dev = to_device(ispif);
> + struct platform_device *pdev = to_platform_device(dev);
> + struct resource *r;
> + int i;
> + int ret;
> +
> + for (i = 0; i < ARRAY_SIZE(ispif->line); i++)
> + ispif->line[i].id = i;
> +
> + mutex_init(&ispif->power_lock);
> + ispif->power_count = 0;
> +
> + mutex_init(&ispif->config_lock);
> +
> + /* Memory */
> +
> + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[0]);
> + ispif->base = devm_ioremap_resource(dev, r);
> + if (IS_ERR(ispif->base)) {
> + dev_err(dev, "could not map memory\n");
> + return PTR_ERR(ispif->base);
> + }
> +
> + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[1]);
> + ispif->base_clk_mux = devm_ioremap_resource(dev, r);
> + if (IS_ERR(ispif->base_clk_mux)) {
> + dev_err(dev, "could not map memory\n");
> + return PTR_ERR(ispif->base_clk_mux);
> + }
> +
> + /* Interrupt */
> +
> + r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res->interrupt);
> +
> + if (!r) {
> + dev_err(dev, "missing IRQ\n");
> + return -EINVAL;
> + }
> +
> + ispif->irq = r->start;
> + snprintf(ispif->irq_name, sizeof(ispif->irq_name), "%s_%s",
> + dev_name(dev), MSM_ISPIF_NAME);
> + ret = devm_request_irq(dev, ispif->irq, ispif_isr,
> + IRQF_TRIGGER_RISING, ispif->irq_name, ispif);
> + if (ret < 0) {
> + dev_err(dev, "request_irq failed: %d\n", ret);
> + return ret;
> + }
> +
> + /* Clocks */
> +
> + ispif->nclocks = 0;
> + while (res->clock[ispif->nclocks])
> + ispif->nclocks++;
> +
> + ispif->clock = devm_kzalloc(dev, ispif->nclocks * sizeof(*ispif->clock),
> + GFP_KERNEL);
> + if (!ispif->clock)
> + return -ENOMEM;
> +
> + for (i = 0; i < ispif->nclocks; i++) {
> + ispif->clock[i] = devm_clk_get(dev, res->clock[i]);
> + if (IS_ERR(ispif->clock[i]))
> + return PTR_ERR(ispif->clock[i]);
> + }
> +
> + ispif->nclocks_for_reset = 0;
> + while (res->clock_for_reset[ispif->nclocks_for_reset])
> + ispif->nclocks_for_reset++;
> +
> + ispif->clock_for_reset = devm_kzalloc(dev, ispif->nclocks_for_reset *
> + sizeof(*ispif->clock_for_reset), GFP_KERNEL);
> + if (!ispif->clock_for_reset)
> + return -ENOMEM;
> +
> + for (i = 0; i < ispif->nclocks_for_reset; i++) {
> + ispif->clock_for_reset[i] = devm_clk_get(dev,
> + res->clock_for_reset[i]);
> + if (IS_ERR(ispif->clock_for_reset[i]))
> + return PTR_ERR(ispif->clock_for_reset[i]);
> + }
> +
> + init_completion(&ispif->reset_complete);
> +
> + return 0;
> +}
> +
> +/*
> + * ispif_get_intf - Get ISPIF interface to use by VFE line id
> + * @line_id: VFE line id that the ISPIF line is connected to
> + *
> + * Return ISPIF interface to use
> + */
> +static enum ispif_intf ispif_get_intf(enum vfe_line_id line_id)
> +{
> + switch (line_id) {
> + case (VFE_LINE_RDI0):
> + return RDI0;
> + case (VFE_LINE_RDI1):
> + return RDI1;
> + case (VFE_LINE_RDI2):
> + return RDI2;
> + default:
> + return RDI0;
> + }
> +}
> +
> +/*
> + * ispif_link_setup - Setup ISPIF connections
> + * @entity: Pointer to media entity structure
> + * @local: Pointer to local pad
> + * @remote: Pointer to remote pad
> + * @flags: Link flags
> + *
> + * Return 0 on success
> + */
> +static int ispif_link_setup(struct media_entity *entity,
> + const struct media_pad *local,
> + const struct media_pad *remote, u32 flags)
> +{
> + if (flags & MEDIA_LNK_FL_ENABLED) {
> + if (media_entity_remote_pad(local))
> + return -EBUSY;
> +
> + if (local->flags & MEDIA_PAD_FL_SINK) {
> + struct v4l2_subdev *sd;
> + struct ispif_line *line;
> +
> + sd = media_entity_to_v4l2_subdev(entity);
> + line = v4l2_get_subdevdata(sd);
> +
> + msm_csid_get_csid_id(remote->entity, &line->csid_id);
> + } else { /* MEDIA_PAD_FL_SOURCE */
> + struct v4l2_subdev *sd;
> + struct ispif_line *line;
> + enum vfe_line_id id;
> +
> + sd = media_entity_to_v4l2_subdev(entity);
> + line = v4l2_get_subdevdata(sd);
> +
> + msm_vfe_get_vfe_id(remote->entity, &line->vfe_id);
> + msm_vfe_get_vfe_line_id(remote->entity, &id);
> + line->interface = ispif_get_intf(id);
> + }
> + }
> +
> + return 0;
> +}
> +
> +static const struct v4l2_subdev_core_ops ispif_core_ops = {
> + .s_power = ispif_set_power,
> +};
> +
> +static const struct v4l2_subdev_video_ops ispif_video_ops = {
> + .s_stream = ispif_set_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops ispif_pad_ops = {
> + .enum_mbus_code = ispif_enum_mbus_code,
> + .enum_frame_size = ispif_enum_frame_size,
> + .get_fmt = ispif_get_format,
> + .set_fmt = ispif_set_format,
> +};
> +
> +static const struct v4l2_subdev_ops ispif_v4l2_ops = {
> + .core = &ispif_core_ops,
> + .video = &ispif_video_ops,
> + .pad = &ispif_pad_ops,
> +};
> +
> +static const struct v4l2_subdev_internal_ops ispif_v4l2_internal_ops = {
> + .open = ispif_init_formats,
> +};
> +
> +static const struct media_entity_operations ispif_media_ops = {
> + .link_setup = ispif_link_setup,
> + .link_validate = v4l2_subdev_link_validate,
> +};
> +
> +/*
> + * msm_ispif_register_entities - Register subdev node for ISPIF module
> + * @ispif: ISPIF device
> + * @v4l2_dev: V4L2 device
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +int msm_ispif_register_entities(struct ispif_device *ispif,
> + struct v4l2_device *v4l2_dev)
> +{
> + struct device *dev = to_device(ispif);

I'd use something such as ispif_to_device(). Perhaps there won't be
to_device() defined anywhere else but it'd clash with this driver if there
is one. Up to you.

> + int ret;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(ispif->line); i++) {
> + struct v4l2_subdev *sd = &ispif->line[i].subdev;
> + struct media_pad *pads = ispif->line[i].pads;
> +
> + v4l2_subdev_init(sd, &ispif_v4l2_ops);
> + sd->internal_ops = &ispif_v4l2_internal_ops;
> + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> + snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d",
> + MSM_ISPIF_NAME, i);
> + v4l2_set_subdevdata(sd, &ispif->line[i]);
> +
> + ret = ispif_init_formats(sd, NULL);
> + if (ret < 0) {
> + dev_err(dev, "Failed to init format: %d\n", ret);
> + goto error;
> + }
> +
> + pads[MSM_ISPIF_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
> + pads[MSM_ISPIF_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE;
> +
> + sd->entity.function = MEDIA_ENT_F_IO_V4L;
> + sd->entity.ops = &ispif_media_ops;
> + ret = media_entity_pads_init(&sd->entity, MSM_ISPIF_PADS_NUM,
> + pads);
> + if (ret < 0) {
> + dev_err(dev, "Failed to init media entity: %d\n", ret);
> + goto error;
> + }
> +
> + ret = v4l2_device_register_subdev(v4l2_dev, sd);
> + if (ret < 0) {
> + dev_err(dev, "Failed to register subdev: %d\n", ret);
> + media_entity_cleanup(&sd->entity);
> + goto error;
> + }
> + }
> +
> + return 0;
> +
> +error:
> + for (i--; i >= 0; i--) {
> + struct v4l2_subdev *sd = &ispif->line[i].subdev;
> +
> + v4l2_device_unregister_subdev(sd);
> + media_entity_cleanup(&sd->entity);
> + }
> +
> + return ret;
> +}
> +
> +/*
> + * msm_ispif_unregister_entities - Unregister ISPIF module subdev node
> + * @ispif: ISPIF device
> + */
> +void msm_ispif_unregister_entities(struct ispif_device *ispif)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(ispif->line); i++) {
> + struct v4l2_subdev *sd = &ispif->line[i].subdev;
> +
> + v4l2_device_unregister_subdev(sd);
> + media_entity_cleanup(&sd->entity);
> + }
> +}
> diff --git a/drivers/media/platform/qcom/camss-8x16/camss-ispif.h b/drivers/media/platform/qcom/camss-8x16/camss-ispif.h
> new file mode 100644
> index 0000000..6a1c9bd
> --- /dev/null
> +++ b/drivers/media/platform/qcom/camss-8x16/camss-ispif.h
> @@ -0,0 +1,85 @@
> +/*
> + * camss-ispif.h
> + *
> + * Qualcomm MSM Camera Subsystem - ISPIF Module
> + *
> + * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
> + * Copyright (C) 2015-2017 Linaro Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#ifndef QC_MSM_CAMSS_ISPIF_H
> +#define QC_MSM_CAMSS_ISPIF_H
> +
> +#include <linux/clk.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-subdev.h>
> +
> +/* Number of ISPIF lines - same as number of CSID hardware modules */
> +#define MSM_ISPIF_LINE_NUM 2
> +
> +#define MSM_ISPIF_PAD_SINK 0
> +#define MSM_ISPIF_PAD_SRC 1
> +#define MSM_ISPIF_PADS_NUM 2
> +
> +#define MSM_ISPIF_VFE_NUM 1
> +
> +enum ispif_intf {
> + PIX0,
> + RDI0,
> + PIX1,
> + RDI1,
> + RDI2
> +};
> +
> +struct ispif_intf_cmd_reg {
> + u32 cmd_0;
> + u32 cmd_1;
> +};
> +
> +struct ispif_line {
> + u8 id;
> + u8 csid_id;
> + u8 vfe_id;
> + enum ispif_intf interface;
> + struct v4l2_subdev subdev;
> + struct media_pad pads[MSM_ISPIF_PADS_NUM];
> + struct v4l2_mbus_framefmt fmt[MSM_ISPIF_PADS_NUM];
> +};
> +
> +struct ispif_device {
> + void __iomem *base;
> + void __iomem *base_clk_mux;
> + u32 irq;
> + char irq_name[30];
> + struct clk **clock;
> + int nclocks;
> + struct clk **clock_for_reset;
> + int nclocks_for_reset;
> + struct completion reset_complete;
> + int power_count;
> + struct mutex power_lock;
> + struct ispif_intf_cmd_reg intf_cmd[MSM_ISPIF_VFE_NUM];
> + struct mutex config_lock;
> + struct ispif_line line[MSM_ISPIF_LINE_NUM];
> +};
> +
> +struct resources_ispif;
> +
> +int msm_ispif_subdev_init(struct ispif_device *ispif,
> + const struct resources_ispif *res);
> +
> +int msm_ispif_register_entities(struct ispif_device *ispif,
> + struct v4l2_device *v4l2_dev);
> +
> +void msm_ispif_unregister_entities(struct ispif_device *ispif);
> +
> +#endif /* QC_MSM_CAMSS_ISPIF_H */

--
Regards,

Sakari Ailus
e-mail: sakari.ailus@iki.fi XMPP: sailus@retiisi.org.uk

\
 
 \ /
  Last update: 2017-07-20 23:23    [W:0.368 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site