lkml.org 
[lkml]   [2017]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 07/23] media: camss: Add CSIPHY files
Date
These files control the CSIPHY modules which are responsible for the physical
layer of the CSI2 receivers.

Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
---
.../media/platform/qcom/camss-8x16/camss-csiphy.c | 816 +++++++++++++++++++++
.../media/platform/qcom/camss-8x16/camss-csiphy.h | 77 ++
2 files changed, 893 insertions(+)
create mode 100644 drivers/media/platform/qcom/camss-8x16/camss-csiphy.c
create mode 100644 drivers/media/platform/qcom/camss-8x16/camss-csiphy.h

diff --git a/drivers/media/platform/qcom/camss-8x16/camss-csiphy.c b/drivers/media/platform/qcom/camss-8x16/camss-csiphy.c
new file mode 100644
index 0000000..4e7ddc4
--- /dev/null
+++ b/drivers/media/platform/qcom/camss-8x16/camss-csiphy.c
@@ -0,0 +1,816 @@
+/*
+ * camss-csiphy.c
+ *
+ * Qualcomm MSM Camera Subsystem - CSIPHY Module
+ *
+ * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2016-2017 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <media/media-entity.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+
+#include "camss-csiphy.h"
+#include "camss.h"
+
+#define MSM_CSIPHY_NAME "msm_csiphy"
+
+#define CAMSS_CSI_PHY_LNn_CFG2(n) (0x004 + 0x40 * (n))
+#define CAMSS_CSI_PHY_LNn_CFG3(n) (0x008 + 0x40 * (n))
+#define CAMSS_CSI_PHY_GLBL_RESET 0x140
+#define CAMSS_CSI_PHY_GLBL_PWR_CFG 0x144
+#define CAMSS_CSI_PHY_GLBL_IRQ_CMD 0x164
+#define CAMSS_CSI_PHY_HW_VERSION 0x188
+#define CAMSS_CSI_PHY_INTERRUPT_STATUSn(n) (0x18c + 0x4 * (n))
+#define CAMSS_CSI_PHY_INTERRUPT_MASKn(n) (0x1ac + 0x4 * (n))
+#define CAMSS_CSI_PHY_INTERRUPT_CLEARn(n) (0x1cc + 0x4 * (n))
+#define CAMSS_CSI_PHY_GLBL_T_INIT_CFG0 0x1ec
+#define CAMSS_CSI_PHY_T_WAKEUP_CFG0 0x1f4
+
+static const struct {
+ u32 code;
+ u8 bpp;
+} csiphy_formats[] = {
+ {
+ MEDIA_BUS_FMT_UYVY8_2X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_VYUY8_2X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_YUYV8_2X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_YVYU8_2X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR8_1X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG8_1X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG8_1X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB8_1X8,
+ 8,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR10_1X10,
+ 10,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG10_1X10,
+ 10,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG10_1X10,
+ 10,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB10_1X10,
+ 10,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR12_1X12,
+ 12,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG12_1X12,
+ 12,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG12_1X12,
+ 12,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB12_1X12,
+ 12,
+ }
+};
+
+/*
+ * csiphy_get_bpp - map media bus format to bits per pixel
+ * @code: media bus format code
+ *
+ * Return number of bits per pixel
+ */
+static u8 csiphy_get_bpp(u32 code)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(csiphy_formats); i++)
+ if (code == csiphy_formats[i].code)
+ break;
+
+ return csiphy_formats[i].bpp;
+}
+
+/*
+ * csiphy_isr - CSIPHY module interrupt handler
+ * @irq: Interrupt line
+ * @dev: CSIPHY device
+ *
+ * Return IRQ_HANDLED on success
+ */
+static irqreturn_t csiphy_isr(int irq, void *dev)
+{
+ struct csiphy_device *csiphy = dev;
+ u8 i;
+
+ for (i = 0; i < 8; i++) {
+ u8 val = readl_relaxed(csiphy->base +
+ CAMSS_CSI_PHY_INTERRUPT_STATUSn(i));
+ writel_relaxed(val, csiphy->base +
+ CAMSS_CSI_PHY_INTERRUPT_CLEARn(i));
+ writel_relaxed(0x1, csiphy->base + CAMSS_CSI_PHY_GLBL_IRQ_CMD);
+ writel_relaxed(0x0, csiphy->base + CAMSS_CSI_PHY_GLBL_IRQ_CMD);
+ writel_relaxed(0x0, csiphy->base +
+ CAMSS_CSI_PHY_INTERRUPT_CLEARn(i));
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * csiphy_reset - Perform software reset on CSIPHY module
+ * @csiphy: CSIPHY device
+ */
+static void csiphy_reset(struct csiphy_device *csiphy)
+{
+ writel_relaxed(0x1, csiphy->base + CAMSS_CSI_PHY_GLBL_RESET);
+ usleep_range(5000, 8000);
+ writel_relaxed(0x0, csiphy->base + CAMSS_CSI_PHY_GLBL_RESET);
+}
+
+/*
+ * csiphy_set_power - Power on/off CSIPHY module
+ * @sd: CSIPHY V4L2 subdevice
+ * @on: Requested power state
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csiphy_set_power(struct v4l2_subdev *sd, int on)
+{
+ struct csiphy_device *csiphy = v4l2_get_subdevdata(sd);
+ struct device *dev = to_device_index(csiphy, csiphy->id);
+ int ret;
+
+ if (on) {
+ u8 hw_version;
+
+ ret = camss_enable_clocks(csiphy->nclocks, csiphy->clock, dev);
+ if (ret < 0)
+ return ret;
+
+ enable_irq(csiphy->irq);
+
+ csiphy_reset(csiphy);
+
+ hw_version = readl_relaxed(csiphy->base +
+ CAMSS_CSI_PHY_HW_VERSION);
+ dev_dbg(dev, "CSIPHY HW Version = 0x%02x\n", hw_version);
+ } else {
+ disable_irq(csiphy->irq);
+
+ camss_disable_clocks(csiphy->nclocks, csiphy->clock);
+ }
+
+ return 0;
+}
+
+/*
+ * csiphy_get_lane_mask - Calculate CSI2 lane mask configuration parameter
+ * @lane_cfg - CSI2 lane configuration
+ *
+ * Return lane mask
+ */
+static u8 csiphy_get_lane_mask(struct csiphy_lanes_cfg *lane_cfg)
+{
+ u8 lane_mask;
+ int i;
+
+ lane_mask = 1 << lane_cfg->clk.pos;
+
+ for (i = 0; i < lane_cfg->num_data; i++)
+ lane_mask |= 1 << lane_cfg->data[i].pos;
+
+ return lane_mask;
+}
+
+/*
+ * csiphy_settle_cnt_calc - Calculate settle count value
+ * @csiphy: CSIPHY device
+ *
+ * Helper function to calculate settle count value. This is
+ * based on the CSI2 T_hs_settle parameter which in turn
+ * is calculated based on the CSI2 transmitter pixel clock
+ * frequency.
+ *
+ * Return settle count value or 0 if the CSI2 pixel clock
+ * frequency is not available
+ */
+static u8 csiphy_settle_cnt_calc(struct csiphy_device *csiphy)
+{
+ u8 bpp = csiphy_get_bpp(
+ csiphy->fmt[MSM_CSIPHY_PAD_SINK].code);
+ u8 num_lanes = csiphy->cfg.csi2->lane_cfg.num_data;
+ u32 pixel_clock; /* Hz */
+ u32 mipi_clock; /* Hz */
+ u32 ui; /* ps */
+ u32 timer_period; /* ps */
+ u32 t_hs_prepare_max; /* ps */
+ u32 t_hs_prepare_zero_min; /* ps */
+ u32 t_hs_settle; /* ps */
+ u8 settle_cnt;
+ int ret;
+
+ ret = camss_get_pixel_clock(&csiphy->subdev.entity, &pixel_clock);
+ if (ret) {
+ dev_err(to_device_index(csiphy, csiphy->id),
+ "Cannot get CSI2 transmitter's pixel clock\n");
+ return 0;
+ }
+
+ mipi_clock = pixel_clock * bpp / (2 * num_lanes);
+ ui = 1000000000000 / (mipi_clock * 2);
+ t_hs_prepare_max = 85000 + 6 * ui;
+ t_hs_prepare_zero_min = 145000 + 10 * ui;
+ t_hs_settle = (t_hs_prepare_max + t_hs_prepare_zero_min) / 2;
+
+ timer_period = 1000000000000 / csiphy->timer_clk_rate;
+ settle_cnt = t_hs_settle / timer_period;
+
+ return settle_cnt;
+}
+
+/*
+ * csiphy_stream_on - Enable streaming on CSIPHY module
+ * @csiphy: CSIPHY device
+ *
+ * Helper function to enable streaming on CSIPHY module.
+ * Main configuration of CSIPHY module is also done here.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csiphy_stream_on(struct csiphy_device *csiphy)
+{
+ struct csiphy_config *cfg = &csiphy->cfg;
+ u8 lane_mask = csiphy_get_lane_mask(&cfg->csi2->lane_cfg);
+ u8 settle_cnt;
+ u8 val;
+ int i = 0;
+
+ settle_cnt = csiphy_settle_cnt_calc(csiphy);
+ if (!settle_cnt)
+ return -EINVAL;
+
+ val = readl_relaxed(csiphy->base_clk_mux);
+ if (cfg->combo_mode && (lane_mask & 0x18) == 0x18) {
+ val &= ~0xf0;
+ val |= cfg->csid_id << 4;
+ } else {
+ val &= ~0xf;
+ val |= cfg->csid_id;
+ }
+ writel_relaxed(val, csiphy->base_clk_mux);
+
+ writel_relaxed(0x1, csiphy->base +
+ CAMSS_CSI_PHY_GLBL_T_INIT_CFG0);
+ writel_relaxed(0x1, csiphy->base +
+ CAMSS_CSI_PHY_T_WAKEUP_CFG0);
+
+ val = 0x1;
+ val |= lane_mask << 1;
+ writel_relaxed(val, csiphy->base + CAMSS_CSI_PHY_GLBL_PWR_CFG);
+
+ val = cfg->combo_mode << 4;
+ writel_relaxed(val, csiphy->base + CAMSS_CSI_PHY_GLBL_RESET);
+
+ while (lane_mask) {
+ if (lane_mask & 0x1) {
+ writel_relaxed(0x10, csiphy->base +
+ CAMSS_CSI_PHY_LNn_CFG2(i));
+ writel_relaxed(settle_cnt, csiphy->base +
+ CAMSS_CSI_PHY_LNn_CFG3(i));
+ writel_relaxed(0x3f, csiphy->base +
+ CAMSS_CSI_PHY_INTERRUPT_MASKn(i));
+ writel_relaxed(0x3f, csiphy->base +
+ CAMSS_CSI_PHY_INTERRUPT_CLEARn(i));
+ }
+
+ lane_mask >>= 1;
+ i++;
+ }
+
+ return 0;
+}
+
+/*
+ * csiphy_stream_off - Disable streaming on CSIPHY module
+ * @csiphy: CSIPHY device
+ *
+ * Helper function to disable streaming on CSIPHY module
+ */
+static void csiphy_stream_off(struct csiphy_device *csiphy)
+{
+ u8 lane_mask = csiphy_get_lane_mask(&csiphy->cfg.csi2->lane_cfg);
+ int i = 0;
+
+ while (lane_mask) {
+ if (lane_mask & 0x1)
+ writel_relaxed(0x0, csiphy->base +
+ CAMSS_CSI_PHY_LNn_CFG2(i));
+
+ lane_mask >>= 1;
+ i++;
+ }
+
+ writel_relaxed(0x0, csiphy->base + CAMSS_CSI_PHY_GLBL_PWR_CFG);
+}
+
+
+/*
+ * csiphy_set_stream - Enable/disable streaming on CSIPHY module
+ * @sd: CSIPHY V4L2 subdevice
+ * @enable: Requested streaming state
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csiphy_set_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct csiphy_device *csiphy = v4l2_get_subdevdata(sd);
+ int ret = 0;
+
+ if (enable)
+ ret = csiphy_stream_on(csiphy);
+ else
+ csiphy_stream_off(csiphy);
+
+ return ret;
+}
+
+/*
+ * __csiphy_get_format - Get pointer to format structure
+ * @csiphy: CSIPHY device
+ * @cfg: V4L2 subdev pad configuration
+ * @pad: pad from which format is requested
+ * @which: TRY or ACTIVE format
+ *
+ * Return pointer to TRY or ACTIVE format structure
+ */
+static struct v4l2_mbus_framefmt *
+__csiphy_get_format(struct csiphy_device *csiphy,
+ struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad,
+ enum v4l2_subdev_format_whence which)
+{
+ if (which == V4L2_SUBDEV_FORMAT_TRY)
+ return v4l2_subdev_get_try_format(&csiphy->subdev, cfg, pad);
+
+ return &csiphy->fmt[pad];
+}
+
+/*
+ * csiphy_try_format - Handle try format by pad subdev method
+ * @csiphy: CSIPHY device
+ * @cfg: V4L2 subdev pad configuration
+ * @pad: pad on which format is requested
+ * @fmt: pointer to v4l2 format structure
+ * @which: wanted subdev format
+ */
+static void csiphy_try_format(struct csiphy_device *csiphy,
+ struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad,
+ struct v4l2_mbus_framefmt *fmt,
+ enum v4l2_subdev_format_whence which)
+{
+ unsigned int i;
+
+ switch (pad) {
+ case MSM_CSIPHY_PAD_SINK:
+ /* Set format on sink pad */
+
+ for (i = 0; i < ARRAY_SIZE(csiphy_formats); i++)
+ if (fmt->code == csiphy_formats[i].code)
+ break;
+
+ /* If not found, use UYVY as default */
+ if (i >= ARRAY_SIZE(csiphy_formats))
+ fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
+
+ fmt->width = clamp_t(u32, fmt->width, 1, 8191);
+ fmt->height = clamp_t(u32, fmt->height, 1, 8191);
+
+ if (fmt->field == V4L2_FIELD_ANY)
+ fmt->field = V4L2_FIELD_NONE;
+
+ fmt->colorspace = V4L2_COLORSPACE_SRGB;
+
+ break;
+
+ case MSM_CSIPHY_PAD_SRC:
+ /* Set and return a format same as sink pad */
+
+ *fmt = *__csiphy_get_format(csiphy, cfg, MSM_CSID_PAD_SINK,
+ which);
+
+ break;
+ }
+}
+
+/*
+ * csiphy_enum_mbus_code - Handle pixel format enumeration
+ * @sd: CSIPHY V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @code: pointer to v4l2_subdev_mbus_code_enum structure
+ * return -EINVAL or zero on success
+ */
+static int csiphy_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ struct csiphy_device *csiphy = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ if (code->pad == MSM_CSIPHY_PAD_SINK) {
+ if (code->index >= ARRAY_SIZE(csiphy_formats))
+ return -EINVAL;
+
+ code->code = csiphy_formats[code->index].code;
+ } else {
+ if (code->index > 0)
+ return -EINVAL;
+
+ format = __csiphy_get_format(csiphy, cfg, MSM_CSIPHY_PAD_SINK,
+ code->which);
+
+ code->code = format->code;
+ }
+
+ return 0;
+}
+
+/*
+ * csiphy_enum_frame_size - Handle frame size enumeration
+ * @sd: CSIPHY V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @fse: pointer to v4l2_subdev_frame_size_enum structure
+ * return -EINVAL or zero on success
+ */
+static int csiphy_enum_frame_size(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ struct csiphy_device *csiphy = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt format;
+
+ if (fse->index != 0)
+ return -EINVAL;
+
+ format.code = fse->code;
+ format.width = 1;
+ format.height = 1;
+ csiphy_try_format(csiphy, cfg, fse->pad, &format, fse->which);
+ fse->min_width = format.width;
+ fse->min_height = format.height;
+
+ if (format.code != fse->code)
+ return -EINVAL;
+
+ format.code = fse->code;
+ format.width = -1;
+ format.height = -1;
+ csiphy_try_format(csiphy, cfg, fse->pad, &format, fse->which);
+ fse->max_width = format.width;
+ fse->max_height = format.height;
+
+ return 0;
+}
+
+/*
+ * csiphy_get_format - Handle get format by pads subdev method
+ * @sd: CSIPHY V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @fmt: pointer to v4l2 subdev format structure
+ *
+ * Return -EINVAL or zero on success
+ */
+static int csiphy_get_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct csiphy_device *csiphy = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ format = __csiphy_get_format(csiphy, cfg, fmt->pad, fmt->which);
+ if (format == NULL)
+ return -EINVAL;
+
+ fmt->format = *format;
+
+ return 0;
+}
+
+/*
+ * csiphy_set_format - Handle set format by pads subdev method
+ * @sd: CSIPHY V4L2 subdevice
+ * @cfg: V4L2 subdev pad configuration
+ * @fmt: pointer to v4l2 subdev format structure
+ *
+ * Return -EINVAL or zero on success
+ */
+static int csiphy_set_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct csiphy_device *csiphy = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ format = __csiphy_get_format(csiphy, cfg, fmt->pad, fmt->which);
+ if (format == NULL)
+ return -EINVAL;
+
+ csiphy_try_format(csiphy, cfg, fmt->pad, &fmt->format, fmt->which);
+ *format = fmt->format;
+
+ /* Propagate the format from sink to source */
+ if (fmt->pad == MSM_CSIPHY_PAD_SINK) {
+ format = __csiphy_get_format(csiphy, cfg, MSM_CSIPHY_PAD_SRC,
+ fmt->which);
+
+ *format = fmt->format;
+ csiphy_try_format(csiphy, cfg, MSM_CSIPHY_PAD_SRC, format,
+ fmt->which);
+ }
+
+ return 0;
+}
+
+/*
+ * csiphy_init_formats - Initialize formats on all pads
+ * @sd: CSIPHY V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ *
+ * Initialize all pad formats with default values.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csiphy_init_formats(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_subdev_format format = {
+ .pad = MSM_CSIPHY_PAD_SINK,
+ .which = fh ? V4L2_SUBDEV_FORMAT_TRY :
+ V4L2_SUBDEV_FORMAT_ACTIVE,
+ .format = {
+ .code = MEDIA_BUS_FMT_UYVY8_2X8,
+ .width = 1920,
+ .height = 1080
+ }
+ };
+
+ return csiphy_set_format(sd, fh ? fh->pad : NULL, &format);
+}
+
+/*
+ * msm_csiphy_subdev_init - Initialize CSIPHY device structure and resources
+ * @csiphy: CSIPHY device
+ * @res: CSIPHY module resources table
+ * @id: CSIPHY module id
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int msm_csiphy_subdev_init(struct csiphy_device *csiphy,
+ const struct resources *res, u8 id)
+{
+ struct device *dev = to_device_index(csiphy, id);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *r;
+ int i;
+ int ret;
+
+ csiphy->id = id;
+ csiphy->cfg.combo_mode = 0;
+
+ /* Memory */
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[0]);
+ csiphy->base = devm_ioremap_resource(dev, r);
+ if (IS_ERR(csiphy->base)) {
+ dev_err(dev, "could not map memory\n");
+ return PTR_ERR(csiphy->base);
+ }
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[1]);
+ csiphy->base_clk_mux = devm_ioremap_resource(dev, r);
+ if (IS_ERR(csiphy->base_clk_mux)) {
+ dev_err(dev, "could not map memory\n");
+ return PTR_ERR(csiphy->base_clk_mux);
+ }
+
+ /* Interrupt */
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
+ res->interrupt[0]);
+ if (!r) {
+ dev_err(dev, "missing IRQ\n");
+ return -EINVAL;
+ }
+
+ csiphy->irq = r->start;
+ snprintf(csiphy->irq_name, sizeof(csiphy->irq_name), "%s_%s%d",
+ dev_name(dev), MSM_CSIPHY_NAME, csiphy->id);
+ ret = devm_request_irq(dev, csiphy->irq, csiphy_isr,
+ IRQF_TRIGGER_RISING, csiphy->irq_name, csiphy);
+ if (ret < 0) {
+ dev_err(dev, "request_irq failed: %d\n", ret);
+ return ret;
+ }
+
+ disable_irq(csiphy->irq);
+
+ /* Clocks */
+
+ csiphy->nclocks = 0;
+ while (res->clock[csiphy->nclocks])
+ csiphy->nclocks++;
+
+ csiphy->clock = devm_kzalloc(dev, csiphy->nclocks *
+ sizeof(*csiphy->clock), GFP_KERNEL);
+ if (!csiphy->clock)
+ return -ENOMEM;
+
+ for (i = 0; i < csiphy->nclocks; i++) {
+ csiphy->clock[i] = devm_clk_get(dev, res->clock[i]);
+ if (IS_ERR(csiphy->clock[i]))
+ return PTR_ERR(csiphy->clock[i]);
+
+ if (res->clock_rate[i]) {
+ long clk_rate = clk_round_rate(csiphy->clock[i],
+ res->clock_rate[i]);
+ if (clk_rate < 0) {
+ dev_err(to_device_index(csiphy, csiphy->id),
+ "clk round rate failed: %ld\n",
+ clk_rate);
+ return -EINVAL;
+ }
+ ret = clk_set_rate(csiphy->clock[i], clk_rate);
+ if (ret < 0) {
+ dev_err(to_device_index(csiphy, csiphy->id),
+ "clk set rate failed: %d\n", ret);
+ return ret;
+ }
+
+ if (!strcmp(res->clock[i], "csiphy0_timer") ||
+ !strcmp(res->clock[i], "csiphy1_timer"))
+ csiphy->timer_clk_rate = clk_rate;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * csiphy_link_setup - Setup CSIPHY connections
+ * @entity: Pointer to media entity structure
+ * @local: Pointer to local pad
+ * @remote: Pointer to remote pad
+ * @flags: Link flags
+ *
+ * Rreturn 0 on success
+ */
+static int csiphy_link_setup(struct media_entity *entity,
+ const struct media_pad *local,
+ const struct media_pad *remote, u32 flags)
+{
+ if ((local->flags & MEDIA_PAD_FL_SOURCE) &&
+ (flags & MEDIA_LNK_FL_ENABLED)) {
+ struct v4l2_subdev *sd;
+ struct csiphy_device *csiphy;
+ struct csid_device *csid;
+
+ if (media_entity_remote_pad(local))
+ return -EBUSY;
+
+ sd = media_entity_to_v4l2_subdev(entity);
+ csiphy = v4l2_get_subdevdata(sd);
+
+ sd = media_entity_to_v4l2_subdev(remote->entity);
+ csid = v4l2_get_subdevdata(sd);
+
+ csiphy->cfg.csid_id = csid->id;
+ }
+
+ return 0;
+}
+
+static const struct v4l2_subdev_core_ops csiphy_core_ops = {
+ .s_power = csiphy_set_power,
+};
+
+static const struct v4l2_subdev_video_ops csiphy_video_ops = {
+ .s_stream = csiphy_set_stream,
+};
+
+static const struct v4l2_subdev_pad_ops csiphy_pad_ops = {
+ .enum_mbus_code = csiphy_enum_mbus_code,
+ .enum_frame_size = csiphy_enum_frame_size,
+ .get_fmt = csiphy_get_format,
+ .set_fmt = csiphy_set_format,
+};
+
+static const struct v4l2_subdev_ops csiphy_v4l2_ops = {
+ .core = &csiphy_core_ops,
+ .video = &csiphy_video_ops,
+ .pad = &csiphy_pad_ops,
+};
+
+static const struct v4l2_subdev_internal_ops csiphy_v4l2_internal_ops = {
+ .open = csiphy_init_formats,
+};
+
+static const struct media_entity_operations csiphy_media_ops = {
+ .link_setup = csiphy_link_setup,
+ .link_validate = v4l2_subdev_link_validate,
+};
+
+/*
+ * msm_csiphy_register_entity - Register subdev node for CSIPHY module
+ * @csiphy: CSIPHY device
+ * @v4l2_dev: V4L2 device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int msm_csiphy_register_entity(struct csiphy_device *csiphy,
+ struct v4l2_device *v4l2_dev)
+{
+ struct v4l2_subdev *sd = &csiphy->subdev;
+ struct media_pad *pads = csiphy->pads;
+ struct device *dev = to_device_index(csiphy, csiphy->id);
+ int ret;
+
+ v4l2_subdev_init(sd, &csiphy_v4l2_ops);
+ sd->internal_ops = &csiphy_v4l2_internal_ops;
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d",
+ MSM_CSIPHY_NAME, csiphy->id);
+ v4l2_set_subdevdata(sd, csiphy);
+
+ ret = csiphy_init_formats(sd, NULL);
+ if (ret < 0) {
+ dev_err(dev, "Failed to init format: %d\n", ret);
+ return ret;
+ }
+
+ pads[MSM_CSIPHY_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+ pads[MSM_CSIPHY_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE;
+
+ sd->entity.function = MEDIA_ENT_F_IO_V4L;
+ sd->entity.ops = &csiphy_media_ops;
+ ret = media_entity_pads_init(&sd->entity, MSM_CSIPHY_PADS_NUM, pads);
+ if (ret < 0) {
+ dev_err(dev, "Failed to init media entity: %d\n", ret);
+ return ret;
+ }
+
+ ret = v4l2_device_register_subdev(v4l2_dev, sd);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register subdev: %d\n", ret);
+ media_entity_cleanup(&sd->entity);
+ }
+
+ return ret;
+}
+
+/*
+ * msm_csiphy_unregister_entity - Unregister CSIPHY module subdev node
+ * @csiphy: CSIPHY device
+ */
+void msm_csiphy_unregister_entity(struct csiphy_device *csiphy)
+{
+ v4l2_device_unregister_subdev(&csiphy->subdev);
+}
diff --git a/drivers/media/platform/qcom/camss-8x16/camss-csiphy.h b/drivers/media/platform/qcom/camss-8x16/camss-csiphy.h
new file mode 100644
index 0000000..a6f23ed
--- /dev/null
+++ b/drivers/media/platform/qcom/camss-8x16/camss-csiphy.h
@@ -0,0 +1,77 @@
+/*
+ * camss-csiphy.h
+ *
+ * Qualcomm MSM Camera Subsystem - CSIPHY Module
+ *
+ * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2016-2017 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef QC_MSM_CAMSS_CSIPHY_H
+#define QC_MSM_CAMSS_CSIPHY_H
+
+#include <linux/clk.h>
+#include <media/media-entity.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-mediabus.h>
+#include <media/v4l2-subdev.h>
+
+#define MSM_CSIPHY_PAD_SINK 0
+#define MSM_CSIPHY_PAD_SRC 1
+#define MSM_CSIPHY_PADS_NUM 2
+
+struct csiphy_lane {
+ u8 pos;
+ u8 pol;
+};
+
+struct csiphy_lanes_cfg {
+ int num_data;
+ struct csiphy_lane *data;
+ struct csiphy_lane clk;
+};
+
+struct csiphy_csi2_cfg {
+ struct csiphy_lanes_cfg lane_cfg;
+};
+
+struct csiphy_config {
+ u8 combo_mode;
+ u8 csid_id;
+ struct csiphy_csi2_cfg *csi2;
+};
+
+struct csiphy_device {
+ u8 id;
+ struct v4l2_subdev subdev;
+ struct media_pad pads[MSM_CSIPHY_PADS_NUM];
+ void __iomem *base;
+ void __iomem *base_clk_mux;
+ u32 irq;
+ char irq_name[30];
+ struct clk **clock;
+ int nclocks;
+ long timer_clk_rate;
+ struct csiphy_config cfg;
+ struct v4l2_mbus_framefmt fmt[MSM_CSIPHY_PADS_NUM];
+};
+
+struct resources;
+
+int msm_csiphy_subdev_init(struct csiphy_device *csiphy,
+ const struct resources *res, u8 id);
+
+int msm_csiphy_register_entity(struct csiphy_device *csiphy,
+ struct v4l2_device *v4l2_dev);
+
+void msm_csiphy_unregister_entity(struct csiphy_device *csiphy);
+
+#endif /* QC_MSM_CAMSS_CSIPHY_H */
--
2.7.4
\
 
 \ /
  Last update: 2017-07-17 12:43    [W:0.319 / U:1.216 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site