lkml.org 
[lkml]   [2017]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v11 0/6] FPGA Manager support for altera passive serial
Date
FPGA Manager passive serial can now support Stratix, Cyclone and Arria
FPGAs.
Thanks to Bastian and Anatolij for helping to extend support beyond Cyclone

changes from v10

- Rebase on v4.12-rc2
- Remove an erroneous cyclone-ps-spi.o reference from drivers/fpga/Makefile
- Change FPGA_MGR_SPI_BITSTREAM_LSB_FIRST tp FPGA_MGR_BITSTREAM_LSB_FIRST
- Change CONF_DONE "low" to "inactive" in an error message
- Add a MODULE_DEVICE_TABLE for SPI
- Patches 1-4 can be merged without 5 and 6
- Patches 5, and 6 Add back in the bitrev8x4 speed up code newly with support
for any size buffer.

Anatolij Gustschin (1):
fpga: Add flag to indicate SPI bitstream is bit-reversed

Joshua Clayton (4):
doc: dt: add altera-ps-spi binding document
fpga manager: Add altera-ps-spi driver for Altera FPGAs
ARM: dts: imx6q-evi: support altera-ps-spi
lib: add bitrev8x4()
fpga-manager: altera-ps-spi: use bitrev8x4

.../bindings/fpga/altera-passive-serial.txt | 29 ++
arch/arm/boot/dts/imx6q-evi.dts | 16 ++
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile | 1 +
drivers/fpga/altera-ps-spi.c | 307 +++++++++++++++++++++
include/linux/bitrev.h | 19 ++
include/linux/fpga/fpga-mgr.h | 2 +
7 files changed, 381 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/altera-passive-serial.txt
create mode 100644 drivers/fpga/altera-ps-spi.c

--
2.11.0

\
 
 \ /
  Last update: 2017-05-25 19:30    [W:0.147 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site