lkml.org 
[lkml]   [2017]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drm/hisilicon: Ensure LDI regs are properly configured.
Date
This patch fixes the following soft lockup:
BUG: soft lockup - CPU#0 stuck for 23s! [weston:307]

On weston idle-timeout the IP is powered down and reset
asserted. On weston resume we get a massive vblank
IRQ storm due to the LDI registers having lost some state.

This state loss is caused by ade_crtc_atomic_begin() not
calling ade_ldi_set_mode(). With this patch applied
resuming from Weston idle-timeout works well.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
index 9a0678a..c09600c 100644
--- a/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
+++ b/drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
@@ -521,9 +521,12 @@ static void ade_crtc_atomic_begin(struct drm_crtc *crtc,
{
struct ade_crtc *acrtc = to_ade_crtc(crtc);
struct ade_hw_ctx *ctx = acrtc->ctx;
+ struct drm_display_mode *mode = &crtc->state->mode;
+ struct drm_display_mode *adj_mode = &crtc->state->adjusted_mode;

if (!ctx->power_on)
(void)ade_power_up(ctx);
+ ade_ldi_set_mode(acrtc, mode, adj_mode);
}

static void ade_crtc_atomic_flush(struct drm_crtc *crtc,
--
2.7.4
\
 
 \ /
  Last update: 2017-05-11 12:10    [W:0.031 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site