lkml.org 
[lkml]   [2017]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] net: dsa: b53: Add compatible strings for the Cygnus-family BCM11360.
From
Date
Hi Eric

A comment on the Device ID.


On 17-04-24 02:50 PM, Eric Anholt wrote:
> Cygnus is a small family of SoCs, of which we currently have
> devicetree for BCM11360 and BCM58300. The 11360's B53 is mostly the
> same as 58xx, just requiring a tiny bit of setup that was previously
> missing.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
> ---
> Documentation/devicetree/bindings/net/dsa/b53.txt | 3 +++
> drivers/net/dsa/b53/b53_srab.c | 2 ++
> 2 files changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt
> index d6c6e41648d4..49c93d3c0839 100644
> --- a/Documentation/devicetree/bindings/net/dsa/b53.txt
> +++ b/Documentation/devicetree/bindings/net/dsa/b53.txt
> @@ -29,6 +29,9 @@ Required properties:
> "brcm,bcm58625-srab"
> "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string
>
> + For the BCM11360 SoC, must be:
> + "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab string
> +
> For the BCM63xx/33xx SoCs with an integrated switch, must be one of:
> "brcm,bcm3384-switch"
> "brcm,bcm6328-switch"
> diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
> index 8a62b6a69703..c37ffd1b6833 100644
> --- a/drivers/net/dsa/b53/b53_srab.c
> +++ b/drivers/net/dsa/b53/b53_srab.c
> @@ -364,6 +364,7 @@ static const struct of_device_id b53_srab_of_match[] = {
> { .compatible = "brcm,bcm53018-srab" },
> { .compatible = "brcm,bcm53019-srab" },
> { .compatible = "brcm,bcm5301x-srab" },
> + { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID },
> @@ -371,6 +372,7 @@ static const struct of_device_id b53_srab_of_match[] = {
> { .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID },
> + { .compatible = "brcm,cygnus-srab", .data = (void *)BCM58XX_DEVICE_ID },
The device ID should be 0xd300. This is the actual value read from the switch regs.
This also requires an entry in the 'b53_switch_chips' structure in b53_common.c.
> { .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { /* sentinel */ },
> };
Other wise this patch set looks good.

I was testing a similar change (except for the above, which doesn't
affect the functionality) to get the switch working and it works.

Thanks
Arun

\
 
 \ /
  Last update: 2017-04-25 01:04    [W:0.167 / U:1.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site