lkml.org 
[lkml]   [2017]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT.
From
Date
On 4/25/2017 12:50 AM, Eric Anholt wrote:

> Cygnus has a single amac controller connected to the B53 switch with 2
> PHYs. On the BCM911360_EP platform, those two PHYs are connected to
> the external ethernet jacks.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
> ---
> arch/arm/boot/dts/bcm-cygnus.dtsi | 60 ++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/bcm911360_entphn.dts | 8 +++++
> 2 files changed, 68 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
> index 009f1346b817..318899df9972 100644
> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
[...]
> @@ -295,6 +345,16 @@
> status = "disabled";
> };
>
> + eth0: enet@18042000 {

Oh, and this one should be named "ethernet", according to the DT spec.

> + compatible = "brcm,amac";
> + reg = <0x18042000 0x1000>,
> + <0x18110000 0x1000>;
> + reg-names = "amac_base", "idm_base";
> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> + max-speed = <1000>;
> + status = "disabled";
> + };
> +
> nand: nand@18046000 {
> compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
> reg = <0x18046000 0x600>, <0xf8105408 0x600>,
[...]

MBR, Sergei

\
 
 \ /
  Last update: 2017-04-25 11:42    [W:0.119 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site