lkml.org 
[lkml]   [2017]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 6/8] thermal: ti-soc-thermal: Fetch slope and offset from DT
Date
Currently slope and offset values for calculating the hot spot
temperature of a thermal zone is being taken directly from driver
data. So fetch them from device tree.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---
drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 0586bd0..2054a5c 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -96,8 +96,8 @@ static inline int __ti_thermal_get_temp(void *devdata, int *temp)
return ret;

/* Default constants */
- slope = s->slope;
- constant = s->constant;
+ slope = thermal_zone_get_slope(data->ti_thermal);
+ constant = thermal_zone_get_offset(data->ti_thermal);

pcb_tz = data->pcb_tz;
/* In case pcb zone is available, use the extrapolation rule with it */
--
1.9.1
\
 
 \ /
  Last update: 2017-03-09 09:11    [W:0.184 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site