lkml.org 
[lkml]   [2017]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/8] ARM: OMAP4460: Thermal: Add slope and offset values
Date
Currently the slope and offset values for calculating the
hot spot temperature of a particular thermal zone is part
of driver data. Pass them here instead and obtain the values
while of node parsing.

Signed-off-by: Keerthy <j-keerthy@ti.com>
---
arch/arm/boot/dts/omap4460.dtsi | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index ef66e12..c43f2a2 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -90,4 +90,8 @@

};

+&cpu_thermal {
+ coefficients = <348 (-9301)>;
+};
+
/include/ "omap446x-clocks.dtsi"
--
1.9.1
\
 
 \ /
  Last update: 2017-03-09 09:10    [W:0.103 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site