Messages in this thread Patch in this message | | | From | Alexandre TORGUE <> | Subject | [PATCH] ARM: configs: stm32: Set CPU_V7M_NUM_IRQ to max value | Date | Thu, 23 Mar 2017 11:09:06 +0100 |
| |
stm32_defconfig is used for several STM32 MCU: STM32F429, STM32F469, STM32F746 and now STM32H743. Each of MCU listed have different interrupts number mapped on NVIC. STM32F429: 81, STM32F469: 92, STM32F746: 97 and STM32H743: 149. I could set CPU_V7M_NUM_IRQ to 149 but in order to avoid forgetting to update this value for next STM32 MCU I prefer to set it to max value: 240.
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig index a9d8e3c..7c9c157 100644 --- a/arch/arm/configs/stm32_defconfig +++ b/arch/arm/configs/stm32_defconfig @@ -20,6 +20,7 @@ CONFIG_EMBEDDED=y # CONFIG_MMU is not set CONFIG_ARM_SINGLE_ARMV7M=y CONFIG_ARCH_STM32=y +CONFIG_CPU_V7M_NUM_IRQ=240 CONFIG_SET_MEM_PARAM=y CONFIG_DRAM_BASE=0x90000000 CONFIG_FLASH_MEM_BASE=0x08000000 -- 1.9.1
| |