lkml.org 
[lkml]   [2017]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 03/17] iio: magnetometer: bmc150_magn_i2c: Add OF device ID table
Date
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

drivers/iio/magnetometer/bmc150_magn_i2c.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/iio/magnetometer/bmc150_magn_i2c.c b/drivers/iio/magnetometer/bmc150_magn_i2c.c
index ee05722587aa..6842cc5d9e59 100644
--- a/drivers/iio/magnetometer/bmc150_magn_i2c.c
+++ b/drivers/iio/magnetometer/bmc150_magn_i2c.c
@@ -63,9 +63,18 @@ static const struct i2c_device_id bmc150_magn_i2c_id[] = {
};
MODULE_DEVICE_TABLE(i2c, bmc150_magn_i2c_id);

+static const struct of_device_id bmc150_magn_of_match[] = {
+ { .compatible = "bosch,bmc150_magn" },
+ { .compatible = "bosch,bmc156_magn" },
+ { .compatible = "bosch,bmm150_magn" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, bmc150_magn_of_match);
+
static struct i2c_driver bmc150_magn_driver = {
.driver = {
.name = "bmc150_magn_i2c",
+ .of_match_table = of_match_ptr(bmc150_magn_of_match),
.acpi_match_table = ACPI_PTR(bmc150_magn_acpi_match),
.pm = &bmc150_magn_pm_ops,
},
--
2.9.3
\
 
 \ /
  Last update: 2017-03-13 21:04    [W:0.287 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site