lkml.org 
[lkml]   [2017]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 07/17] iio: pressure: hp03: Add OF device ID table
Date
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

drivers/iio/pressure/hp03.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/iio/pressure/hp03.c b/drivers/iio/pressure/hp03.c
index ac76515d5d49..0f3824cf1278 100644
--- a/drivers/iio/pressure/hp03.c
+++ b/drivers/iio/pressure/hp03.c
@@ -297,9 +297,16 @@ static const struct i2c_device_id hp03_id[] = {
};
MODULE_DEVICE_TABLE(i2c, hp03_id);

+static const struct of_device_id hp03_of_match[] = {
+ { .compatible = "hoperf,hp03" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, hp03_of_match);
+
static struct i2c_driver hp03_driver = {
.driver = {
.name = "hp03",
+ .of_match_table = of_match_ptr(hp03_of_match),
},
.probe = hp03_probe,
.remove = hp03_remove,
--
2.9.3
\
 
 \ /
  Last update: 2017-03-13 21:04    [W:0.290 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site