lkml.org 
[lkml]   [2017]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/4] qxl: read monitors config at boot
Date
Try to read the client monitors config at driver load time, even without
explicit notification. So in case that info was filled before the driver
loaded and we've missed the notifications because of that the settings
will still be used.

With that place we now have to take care to properly handle a empty client
monitors config, so we don't trip over an uninitialized client monitors
config.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
drivers/gpu/drm/qxl/qxl_display.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/qxl/qxl_display.c b/drivers/gpu/drm/qxl/qxl_display.c
index 2b99496..cf99ace 100644
--- a/drivers/gpu/drm/qxl/qxl_display.c
+++ b/drivers/gpu/drm/qxl/qxl_display.c
@@ -81,6 +81,10 @@ static int qxl_display_copy_rom_client_monitors_config(struct qxl_device *qdev)
qdev->rom->client_monitors_config_crc);
return MONITORS_CONFIG_BAD_CRC;
}
+ if (!num_monitors) {
+ DRM_DEBUG_KMS("no client monitors configured\n");
+ return status;
+ }
if (num_monitors > qdev->monitors_config->max_allowed) {
DRM_DEBUG_KMS("client monitors list will be truncated: %d < %d\n",
qdev->monitors_config->max_allowed, num_monitors);
@@ -1192,6 +1196,7 @@ int qxl_modeset_init(struct qxl_device *qdev)
qdev_output_init(&qdev->ddev, i);
}

+ qxl_display_read_client_monitors_config(qdev);
qdev->mode_info.mode_config_initialized = true;

drm_mode_config_reset(&qdev->ddev);
--
1.8.3.1
\
 
 \ /
  Last update: 2017-03-01 13:40    [W:0.031 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site