lkml.org 
[lkml]   [2017]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/9] dmaengine: sun6i: support V3s SoC variant
On Sat, Feb 25, 2017 at 08:30:25PM +0800, Icenowy Zheng wrote:
> Allwinner V3s has a DMA engine similar to the ones from A31, but with
> fewer channels and DRQs.
>
> Add support for it.
>
> As it also needs the special gate bit, make the gate bit generic.

That should be part of a separate patch.

>
> According to BSP source code, SUN8IW6 (A83T) also needs the bit, so it
> have also been specified gate_needed property.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> ---
> Documentation/devicetree/bindings/dma/sun6i-dma.txt | 1 +
> drivers/dma/sun6i-dma.c | 17 ++++++++++++++---
> 2 files changed, 15 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
> index 6b267045f522..98fbe1a5c6dd 100644
> --- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt
> +++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
> @@ -9,6 +9,7 @@ Required properties:
> "allwinner,sun8i-a23-dma"
> "allwinner,sun8i-a83t-dma"
> "allwinner,sun8i-h3-dma"
> + "allwinner,sun8i-v3s-dma"
> - reg: Should contain the registers base address and length
> - interrupts: Should contain a reference to the interrupt used by this device
> - clocks: Should contain a reference to the parent AHB clock
> diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
> index a2358780ab2c..1f38424c1b14 100644
> --- a/drivers/dma/sun6i-dma.c
> +++ b/drivers/dma/sun6i-dma.c
> @@ -101,6 +101,7 @@ struct sun6i_dma_config {
> u32 nr_max_channels;
> u32 nr_max_requests;
> u32 nr_max_vchans;
> + bool gate_needed;
> };
>
> /*
> @@ -1009,12 +1010,14 @@ static struct sun6i_dma_config sun8i_a23_dma_cfg = {
> .nr_max_channels = 8,
> .nr_max_requests = 24,
> .nr_max_vchans = 37,
> + .gate_needed = true,
> };
>
> static struct sun6i_dma_config sun8i_a83t_dma_cfg = {
> .nr_max_channels = 8,
> .nr_max_requests = 28,
> .nr_max_vchans = 39,
> + .gate_needed = true,
> };
>
> /*
> @@ -1028,11 +1031,19 @@ static struct sun6i_dma_config sun8i_h3_dma_cfg = {
> .nr_max_vchans = 34,
> };
>
> +static struct sun6i_dma_config sun8i_v3s_dma_cfg = {
> + .nr_max_channels = 8,
> + .nr_max_requests = 23,
> + .nr_max_vchans = 24,

This one is suspicious. There's just a single endpoint that can be
used in both directions?

Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-02-27 09:16    [W:0.059 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site