lkml.org 
[lkml]   [2017]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] media: vpif: request enable-gpios
Date
This change is needed to make vpif capture work on the da850-evm board
where the capture function must be selected on the UI expander.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
drivers/media/platform/davinci/vpif_capture.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/media/platform/davinci/vpif_capture.c b/drivers/media/platform/davinci/vpif_capture.c
index b62a399..7dea358 100644
--- a/drivers/media/platform/davinci/vpif_capture.c
+++ b/drivers/media/platform/davinci/vpif_capture.c
@@ -24,6 +24,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/gpio/consumer.h>

#include <media/v4l2-ioctl.h>

@@ -1433,6 +1434,7 @@ static __init int vpif_probe(struct platform_device *pdev)
{
struct vpif_subdev_info *subdevdata;
struct i2c_adapter *i2c_adap;
+ struct gpio_descs *descs;
struct resource *res;
int subdev_count;
int res_idx = 0;
@@ -1443,6 +1445,11 @@ static __init int vpif_probe(struct platform_device *pdev)
return -EINVAL;
}

+ descs = devm_gpiod_get_array_optional(&pdev->dev,
+ "enable", GPIOD_OUT_HIGH);
+ if (IS_ERR(descs))
+ dev_err(&pdev->dev, "Error requesting enable GPIOs\n");
+
vpif_dev = &pdev->dev;

err = initialize_vpif();
--
2.9.3
\
 
 \ /
  Last update: 2017-02-22 14:28    [W:0.077 / U:1.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site