lkml.org 
[lkml]   [2017]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCHv4 0/1] Set FORCE_CSX bit when arbitration between NAND and NOR is enabled
Date
Note: I've picked this up from Kalyan to try and get things into shape for
submission upstream.

When the arbitration between NOR and NAND flash is enabled
the <FORCE_CSX> field bit[21] in the Data Flash Control Register
needs to be set to 1 according to guidleine GL-5830741
mentioned in Marvell Errata document MV-S501377-00, Rev. D.

Set the FORCE_CSX bit in NDCR for ARMADA370 variants as the arbitration
is always enabled by default. This change does not apply for pxa3xx
variants because FORCE_CSX bit does not exist/reserved on the NFCv1.

Ran the "flash_speed" tool on NAND flash on a board with
Armada-xp based SoC which uses only one NAND chip and not using
the arbiter. There is no regression or speed penalty
introduced due to this change.

Kalyan Kinthada (1):
mtd: nand: pxa3xx: Set FORCE_CSX bit to ARMADA370 variants

drivers/mtd/nand/pxa3xx_nand.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)

--
2.15.1

\
 
 \ /
  Last update: 2017-12-22 00:28    [W:3.026 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site