lkml.org 
[lkml]   [2017]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Fixed typo in onewire generic doc
Date
Onewire devices has 6 byte long unique serial numbers, 1 byte family
code and 1 byte CRC. Linux sysfs presents the device folder in the
form of familyID-deviceID, so CRC is not shown. The consequence is
that the device serial number is always a 12 long hex-string, but
doc says 13 in one place. This is corrected by this change.
Reference: https://en.wikipedia.org/wiki/1-Wire

Signed-off-by: Gergo Huszty <huszty.gergo@digitaltrip.hu>
---
Documentation/w1/w1.generic | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/w1/w1.generic b/Documentation/w1/w1.generic
index b3ffaf8cfab2..c51b1ab012d0 100644
--- a/Documentation/w1/w1.generic
+++ b/Documentation/w1/w1.generic
@@ -76,7 +76,7 @@ See struct w1_bus_master definition in w1.h for details.

w1 master sysfs interface
------------------------------------------------------------------
-<xx-xxxxxxxxxxxxx> - A directory for a found device. The format is family-serial
+<xx-xxxxxxxxxxxx> - A directory for a found device. The format is family-serial
bus - (standard) symlink to the w1 bus
driver - (standard) symlink to the w1 driver
w1_master_add - (rw) manually register a slave device
--
2.15.1
\
 
 \ /
  Last update: 2017-12-20 20:10    [W:0.046 / U:0.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site