lkml.org 
[lkml]   [2017]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
Subjectr8169 take too long to complete driver initialization
Hi,
We've hit a suspend/resume issue on a Acer desktop caused by r8169
driver. The dmseg
https://gist.github.com/mschiu77/b741849b5070281daaead8dfee312d1a
shows it's still in msleep() within a mutex lock.
After looking into the code, it's caused by the
rtl8168ep_stop_cmac() which is waiting 100 seconds for
rtl_ocp_tx_cond. The following dmesg states that the r8169 driver is
loaded.

[ 20.270526] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

But it takes > 100 seconds to get the following messages

[ 140.400223] r8169 0000:02:00.0 (unnamed net_device)
(uninitialized): rtl_ocp_tx_cond == 1 (loop: 2000, delay: 50).
[ 140.413294] r8169 0000:02:00.0 eth0: RTL8168ep/8111ep at
0xffffb16c80db1000, f8:0f:41:ea:74:0d, XID 10200800 IRQ 46
[ 140.413297] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200
bytes, tx checksumming: ko]

So any trial to suspend the machine during this period would always
get device/resource busy message then abort. Is this rtl_ocp_tx_cond
necessary? Because the ethernet is still working and I don't see any
problem. I don't know it should be considered normal or not. Please
let me know if any more information required. Thanks

Chris

\
 
 \ /
  Last update: 2017-12-20 09:42    [W:0.079 / U:0.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site