lkml.org 
[lkml]   [2017]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] ARM: dts: add reset property for rk3066a-rayeager emac phy
Date
The ethernet phy of rk3066a-rayeager has a reset pin, it controlled by
GPIO1_D6, this pin should be pull down then pull up to reset the phy.
Add a reset-gpios property in phy0, make the phy can be reset when emac
power on.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2:
use a generic property for reset, and this patch follow these 2 pathes
from Geert Uytterhoeven <geert+renesas@glider.be>
http://patchwork.ozlabs.org/patch/828499/
http://patchwork.ozlabs.org/patch/828505/

arch/arm/boot/dts/rk3066a-rayeager.dts | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 570157f..04c1f97 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -177,6 +177,7 @@

phy0: ethernet-phy@0 {
reg = <0>;
+ reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
};
};

--
2.7.4
\
 
 \ /
  Last update: 2017-11-08 21:11    [W:0.354 / U:1.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site