lkml.org 
[lkml]   [2017]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/8] ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin
Date
The correct DT property for specifying a GPIO used for reset
is "reset-gpios", fix this here.

Fixes: 4341881d0562 ("ARM: dts: Add devicetree for Gumstix Pepper board")

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
arch/arm/boot/dts/am335x-pepper.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 03c7d77023c6..9fb7426070ce 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -139,7 +139,7 @@
&audio_codec {
status = "okay";

- gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
AVDD-supply = <&ldo3_reg>;
IOVDD-supply = <&ldo3_reg>;
DRVDD-supply = <&ldo3_reg>;
--
2.15.0
\
 
 \ /
  Last update: 2017-11-29 18:16    [W:0.446 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site