lkml.org 
[lkml]   [2017]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[PATCH RFC 0/4] i2c: at91: slave mode support
Based on the discussion we had on the i2c-linux list [1], I wrote a patch for
AT91 hardware and tried to fulfill the Linux I2C slave interface description
[2] as good as possible. This enables aforementioned hardware to act as an I2C
slave that can be accessed by a remote I2C master.

I have tested this patchset successfully on an ATSAMA5D27 with the
i2c-slave-eeprom backend for some time and I'm convinced that it works stable
enough to be reviewed by you.

Since I am a newcomer to kernel coding, I really would like to hear your
comments on this patchset.

[1] https://marc.info/?t=150824004800001&r=1&w=1
[2] https://www.kernel.org/doc/Documentation/i2c/slave-interface

Juergen Fitschen (4):
i2c: at91: segregate master mode specific code from probe and init
func
i2c: at91: split driver into core and master file
i2c: at91: added slave mode support
i2c: at91: take slave mode capabilities of hardware into account

MAINTAINERS | 3 +-
drivers/i2c/busses/Makefile | 4 +
drivers/i2c/busses/i2c-at91-core.c | 390 +++++++++++
drivers/i2c/busses/i2c-at91-master.c | 804 ++++++++++++++++++++++
drivers/i2c/busses/i2c-at91-slave.c | 147 ++++
drivers/i2c/busses/i2c-at91.c | 1243 ----------------------------------
drivers/i2c/busses/i2c-at91.h | 184 +++++
7 files changed, 1531 insertions(+), 1244 deletions(-)
create mode 100644 drivers/i2c/busses/i2c-at91-core.c
create mode 100644 drivers/i2c/busses/i2c-at91-master.c
create mode 100644 drivers/i2c/busses/i2c-at91-slave.c
delete mode 100644 drivers/i2c/busses/i2c-at91.c
create mode 100644 drivers/i2c/busses/i2c-at91.h

--
2.7.4

\
 
 \ /
  Last update: 2017-10-28 20:19    [W:0.141 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site