lkml.org 
[lkml]   [2017]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/4] ARM: K2G: Add support for TI-SCI Generic PM Domains
Date
Hi,
This is v3 of the series to add support for TI-SCI Generic PM Domains.
Previous versions can be found here:

v2: https://www.spinics.net/lists/kernel/msg2364612.html
v1: http://www.spinics.net/lists/arm-kernel/msg525204.html

This version is rebased on v4.10-rc2 but is the same as v2 with the
exception of patch 2 in which the devicetree binding documentation
needed to be updated to show the k2g_pds node should be a child of
the pmmc node. Apart from that, the acks provided by Ulf were added
to patches 1 and 3.

Now that the TI-SCI series has been merged [1] this series will be ready
to go in with an ack on the DT binding. Rob had raised some questions on
the necessity ti,sci-id property but I believe these were properly
addressed during the discussion of v2 so hopefully an ack is in order now.

Regards,
Dave

[1] http://www.spinics.net/lists/arm-kernel/msg536851.html

Dave Gerlach (4):
PM / Domains: Add generic data pointer to genpd data struct
dt-bindings: Add TI SCI PM Domains
soc: ti: Add ti_sci_pm_domains driver
ARM: keystone: Drop PM domain support for k2g

.../devicetree/bindings/soc/ti/sci-pm-domain.txt | 59 ++++++
MAINTAINERS | 3 +
arch/arm/mach-keystone/Kconfig | 1 +
arch/arm/mach-keystone/pm_domain.c | 4 +-
drivers/soc/ti/Kconfig | 12 ++
drivers/soc/ti/Makefile | 1 +
drivers/soc/ti/ti_sci_pm_domains.c | 198 +++++++++++++++++++++
include/dt-bindings/genpd/k2g.h | 90 ++++++++++
include/linux/pm_domain.h | 1 +
9 files changed, 368 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
create mode 100644 drivers/soc/ti/ti_sci_pm_domains.c
create mode 100644 include/dt-bindings/genpd/k2g.h

--
2.11.0

\
 
 \ /
  Last update: 2017-01-04 22:04    [W:0.186 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site