Messages in this thread Patch in this message | | | From | Jia Hongtao <> | Subject | [PATCH 2/3] powerpc/mpc85xx: Update TMU device tree node for T1040/T1042 | Date | Wed, 4 Jan 2017 16:57:50 +0800 |
| |
From: Hongtao Jia <hongtao.jia@nxp.com>
Update #thermal-sensor-cells from 0 to 1 according to the new binding. The sensor specifier added is the monitoring site ID, and represents the "n" in TRITSRn and TRATSRn.
Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com> --- arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi index 44e399b..145c7f4 100644 --- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi @@ -526,7 +526,7 @@ 0x00030000 0x00000012 0x00030001 0x0000001d>; - #thermal-sensor-cells = <0>; + #thermal-sensor-cells = <1>; }; thermal-zones { @@ -534,7 +534,7 @@ polling-delay-passive = <1000>; polling-delay = <5000>; - thermal-sensors = <&tmu>; + thermal-sensors = <&tmu 2>; trips { cpu_alert: cpu-alert { -- 2.1.0.27.g96db324
| |