lkml.org 
[lkml]   [2017]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 1/3] dt-bindings: Update QorIQ TMU thermal bindings
Date
Seems like Troy's email client has issues which causes his reply is unreadable in patchwork.
Please ignore it in patchwork.

Regards,
Yuantian

> -----Original Message-----
> From: Troy Jia
> Sent: Thursday, January 05, 2017 10:29 AM
> To: Scott Wood <oss@buserror.net>; rui.zhang@intel.com;
> edubezval@gmail.com; Y.T. Tang <yuantian.tang@nxp.com>;
> robh+dt@kernel.org
> Cc: linux-pm@vger.kernel.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Subject: RE: [PATCH 1/3] dt-bindings: Update QorIQ TMU thermal bindings
>
>
>
> > -----Original Message-----
> > From: Scott Wood [mailto:oss@buserror.net]
> > Sent: Wednesday, January 04, 2017 6:38 PM
> > To: Troy Jia <hongtao.jia@nxp.com>; rui.zhang@intel.com;
> > edubezval@gmail.com; Y.T. Tang <yuantian.tang@nxp.com>;
> > robh+dt@kernel.org
> > Cc: linux-pm@vger.kernel.org; devicetree@vger.kernel.org; linux-
> > kernel@vger.kernel.org
> > Subject: Re: [PATCH 1/3] dt-bindings: Update QorIQ TMU thermal
> > bindings
> >
> > On Wed, 2017-01-04 at 16:57 +0800, Jia Hongtao wrote:
> > > For different types of SoC the sensor id and endianness may vary.
> > > "#thermal-sensor-cells" is used to provide sensor id information.
> > > "little-endian" property is to tell the endianness of TMU.
> > >
> > > Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com>
> > > Acked-by: Rob Herring <robh@kernel.org>
> > > ---
> > >  Documentation/devicetree/bindings/thermal/qoriq-thermal.txt | 7
> > > +++++++
> > >  1 file changed, 7 insertions(+)
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > > b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > > index 66223d5..20ca4ef 100644
> > > --- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > > +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > > @@ -17,6 +17,12 @@ Required properties:
> > >   calibration data, as specified by the SoC reference manual.
> > >   The first cell of each pair is the value to be written to TTCFGR,
> > >   and the second is the value to be written to TSCFGR.
> > > +- #thermal-sensor-cells : Must be 1. The sensor specifier is the
> monitoring
> > > + site ID, and represents the "n" in TRITSRn and TRATSRn.
> >
> > I assume the driver will continue to work with existing device trees
> > where this information is absent?  If so, ACK for the whole series.
>
> Yes. The driver works for all existing device trees.
>
> Thanks for the ACK.
>
> >
> > -Scott

\
 
 \ /
  Last update: 2017-01-06 07:59    [W:0.443 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site