lkml.org 
[lkml]   [2017]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/4] mpt3sas: Added print to notify cable running at a degraded speed.
From
Date
On Fri, 2017-01-20 at 20:12 +0530, Chaitra P B wrote:
> Driver processes the event MPI26_EVENT_ACTIVE_CABLE_DEGRADED
> when a cable is present and is running at a degraded speed
> (below the SAS3 12 Gb/s rate). Prints added
> to inform the user that the cable is not running at
> optimal speed.
[]
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
[]
> @@ -8028,15 +8028,23 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
> case MPI2_EVENT_ACTIVE_CABLE_EXCEPTION:
> ActiveCableEventData =
> (Mpi26EventDataActiveCableExcept_t *) mpi_reply->EventData;
> - if (ActiveCableEventData->ReasonCode ==
> - MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER) {
> - pr_info(MPT3SAS_FMT "Currently an active cable with ReceptacleID %d",
> + switch (ActiveCableEventData->ReasonCode) {
> + case MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER:
> + pr_info(MPT3SAS_FMT "Currently an active cable with ReceptacleID %d\n",
> ioc->name, ActiveCableEventData->ReceptacleID);
> - pr_info("cannot be powered and devices connected to this active cable");
> - pr_info("will not be seen. This active cable");
> - pr_info("requires %d mW of power",
> + pr_info(" cannot be powered and devices connected to\n");
> + pr_info(" this active cable will not be seen. This\n");
> + pr_info(" cable requires %d mW of power\n",

Can you please use more intelligible logging
where sentences are not broken across multiple
lines of output? Something like:

pr_notice(MPT3SAS_FMT "Receptacle ID %d: This active cable requires %d mW of power\n",
ioc->name, ActiveCableEventData->ReceptacleID,
ActiveCableEventData->ActiveCablePowerRequirement);
pr_notice(MPT3SAS_FMT "Receptacle ID %d: Devices connected to this active cable will not be seen\n",
ioc->name, ActiveCableEventData->ReceptacleID);

I believe MPT3SAS_FMT is unnecessary obfuscation and
it should just be replaced by "%s: " everywhere.

\
 
 \ /
  Last update: 2017-01-20 18:59    [W:0.848 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site