lkml.org 
[lkml]   [2017]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 14/14] ARM: dts: da850-lcdk: enable the SATA node
Date
Enable the SATA node for da850-lcdk. We omit the pinctrl property on
purpose - the muxed SATA pins are not hooked up to anything
SATA-related on the lcdk.

The REFCLKN/P rate on the board is 100MHz, so we need a multiplier of
15 for 1.5GHz PLL rate.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/boot/dts/da850-lcdk.dts | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index afcb482..fbeee3c 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -105,6 +105,10 @@
status = "okay";
};

+&sata {
+ status = "okay";
+};
+
&mdio {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
--
2.9.3
\
 
 \ /
  Last update: 2017-01-17 13:28    [W:0.855 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site