lkml.org 
[lkml]   [2017]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 14/14] ARM: dts: da850-lcdk: enable the SATA node
Date
Bartosz Golaszewski <bgolaszewski@baylibre.com> writes:

> Enable the SATA node for da850-lcdk. We omit the pinctrl property on
> purpose - the muxed SATA pins are not hooked up to anything
> SATA-related on the lcdk.
>
> The REFCLKN/P rate on the board is 100MHz, so we need a multiplier of
> 15 for 1.5GHz PLL rate.

leftover comment from previous version?

Kevin

> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
> arch/arm/boot/dts/da850-lcdk.dts | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
> index afcb482..fbeee3c 100644
> --- a/arch/arm/boot/dts/da850-lcdk.dts
> +++ b/arch/arm/boot/dts/da850-lcdk.dts
> @@ -105,6 +105,10 @@
> status = "okay";
> };
>
> +&sata {
> + status = "okay";
> +};
> +
> &mdio {
> pinctrl-names = "default";
> pinctrl-0 = <&mdio_pins>;

\
 
 \ /
  Last update: 2017-01-18 01:40    [W:0.128 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site