lkml.org 
[lkml]   [2016]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 6/7] clk: sunxi-ng: Add A23 CCU
On Thu, Sep 8, 2016 at 4:29 PM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> On Wed, Sep 07, 2016 at 03:24:11PM +0800, Chen-Yu Tsai wrote:
>> > + [CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
>>
>> A23 manual and Allwinner sources say there is a bus gate for SPINLOCK.
>> Tested it myself, and it indeed exists.
>
> Yes, sorry. It was supposed to be spinlock instead of msgbox.
>
>> > + [RST_BUS_SPINLOCK] = { 0x2c4, BIT(22) },
>>
>> Allwinner sources say there is a reset control for MSGBOX.
>> Tested it myself, and it indeed exists.
>
> However, the msgbox is mentionned nowhere in the datasheet.
>
> I'd prefer to be able to test that it actually works before adding it
> to the clock driver.

I did in fact test it. With reset asserted, writes get ignored,
and reads produce all 0s. With the reset deasserted and clock
enabled, reads give the default value and writes stick. Afterwards
when I toggle the reset, the values revert to the default.

ChenYu

\
 
 \ /
  Last update: 2016-09-17 09:58    [W:1.195 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site