lkml.org 
[lkml]   [2016]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 6/7] clk: sunxi-ng: Add A23 CCU
On Thu, Sep 08, 2016 at 04:32:25PM +0800, Chen-Yu Tsai wrote:
> On Thu, Sep 8, 2016 at 4:29 PM, Maxime Ripard
> <maxime.ripard@free-electrons.com> wrote:
> > On Wed, Sep 07, 2016 at 03:24:11PM +0800, Chen-Yu Tsai wrote:
> >> > + [CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
> >>
> >> A23 manual and Allwinner sources say there is a bus gate for SPINLOCK.
> >> Tested it myself, and it indeed exists.
> >
> > Yes, sorry. It was supposed to be spinlock instead of msgbox.
> >
> >> > + [RST_BUS_SPINLOCK] = { 0x2c4, BIT(22) },
> >>
> >> Allwinner sources say there is a reset control for MSGBOX.
> >> Tested it myself, and it indeed exists.
> >
> > However, the msgbox is mentionned nowhere in the datasheet.
> >
> > I'd prefer to be able to test that it actually works before adding it
> > to the clock driver.
>
> I did in fact test it. With reset asserted, writes get ignored,
> and reads produce all 0s. With the reset deasserted and clock
> enabled, reads give the default value and writes stick. Afterwards
> when I toggle the reset, the values revert to the default.

Ok.

Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-09-17 09:58    [W:0.101 / U:0.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site