Messages in this thread Patch in this message | | | From | Robert Jarzmik <> | Subject | [PATCH] ARM: dts: pxa: fix gpio0 and gpio1 interrupts | Date | Mon, 26 Sep 2016 09:22:11 +0200 |
| |
Since gpio-pxa was redesigned to differenciate gpio0, gpio1 and the gpio-mux interrupt as in the hardware IP, the device-tree description should be amended so that interrupts from gpio0 and gpio1 can be mapped to consumers.
This is especially true on lubbock and mainstone devices where gpio0 is multiplexed on pxa_cplds for ethernet, sa1111, usb udc, and other devices.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> --- arch/arm/boot/dts/pxa2xx.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index 3ff077ca4400..e4ebcde17837 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -54,8 +54,8 @@ reg = <0x40e00000 0x10000>; gpio-controller; #gpio-cells = <0x2>; - interrupts = <10>; - interrupt-names = "gpio_mux"; + interrupts = <8>, <9>, <10>; + interrupt-names = "gpio0", "gpio1", "gpio_mux"; interrupt-controller; #interrupt-cells = <0x2>; ranges; -- 2.1.4
| |