Messages in this thread | | | From | Joel Stanley <> | Subject | [PATCH net-next v2 0/6] ftgmac100 support for ast2500 | Date | Thu, 22 Sep 2016 08:34:57 +0930 |
| |
Hello Dave,
This series adds support to the ftgmac100 driver for the Aspeed ast2400 and ast2500 SoCs. In particular, they ensure the driver works correctly on the ast2500 where the MAC block has seen some changes in register layout.
They have been tested on ast2400 and ast2500 systems with the NCSI stack and with a directly attached PHY.
V2 reworks the two patches relating to PHYSTS_CHG into the one patch that disables the interrupt instead of playing with interrupt sensitivity. I kept patch 4 'net/faraday: Clear stale interrupts' which was first introduced to clear the stale PHYSTS_CHG interrupt, as it helps keep us safe from unhygienic (vendor) bootloaders.
Cheers,
Joel
Andrew Jeffery (2): net/faraday: Separate rx page storage from rxdesc net/faraday: Make EDO{R,T}R bits configurable
Gavin Shan (1): net/faraday: Clear stale interrupts
Joel Stanley (3): net/faraday: Adapt for Aspeed SoCs net/faraday: Configure old MDIO interface on Aspeed SoCs net/faraday: Mask out PHYSTS_CHG interrupt
drivers/net/ethernet/faraday/ftgmac100.c | 97 +++++++++++++++++++++++--------- drivers/net/ethernet/faraday/ftgmac100.h | 8 ++- 2 files changed, 75 insertions(+), 30 deletions(-)
-- 2.9.3
| |