lkml.org 
[lkml]   [2016]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND][PATCH 1/2] phy: bcm-ns2-pcie: Get rid of struct ns2_pci_phy
Date
By setting phy_set_drvdata(phy, mdiodev), struct ns2_pci_phy can be
removed.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
I don't have this h/w. Appreciate if someone can test this patch serial.
This was sent on http://www.spinics.net/lists/netdev/msg383513.html

drivers/phy/phy-bcm-ns2-pcie.c | 25 +++++--------------------
1 file changed, 5 insertions(+), 20 deletions(-)

diff --git a/drivers/phy/phy-bcm-ns2-pcie.c b/drivers/phy/phy-bcm-ns2-pcie.c
index 9513f7a..ee61772 100644
--- a/drivers/phy/phy-bcm-ns2-pcie.c
+++ b/drivers/phy/phy-bcm-ns2-pcie.c
@@ -18,11 +18,6 @@
#include <linux/phy.h>
#include <linux/phy/phy.h>

-struct ns2_pci_phy {
- struct mdio_device *mdiodev;
- struct phy *phy;
-};
-
#define BLK_ADDR_REG_OFFSET 0x1f
#define PLL_AFE1_100MHZ_BLK 0x2100
#define PLL_CLK_AMP_OFFSET 0x03
@@ -30,17 +25,17 @@ struct ns2_pci_phy {

static int ns2_pci_phy_init(struct phy *p)
{
- struct ns2_pci_phy *phy = phy_get_drvdata(p);
+ struct mdio_device *mdiodev = phy_get_drvdata(p);
int rc;

/* select the AFE 100MHz block page */
- rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr,
+ rc = mdiobus_write(mdiodev->bus, mdiodev->addr,
BLK_ADDR_REG_OFFSET, PLL_AFE1_100MHZ_BLK);
if (rc)
goto err;

/* set the 100 MHz reference clock amplitude to 2.05 v */
- rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr,
+ rc = mdiobus_write(mdiodev->bus, mdiodev->addr,
PLL_CLK_AMP_OFFSET, PLL_CLK_AMP_2P05V);
if (rc)
goto err;
@@ -48,7 +43,7 @@ static int ns2_pci_phy_init(struct phy *p)
return 0;

err:
- dev_err(&phy->mdiodev->dev, "Error %d writing to phy\n", rc);
+ dev_err(&mdiodev->dev, "Error %d writing to phy\n", rc);
return rc;
}

@@ -60,7 +55,6 @@ static int ns2_pci_phy_probe(struct mdio_device *mdiodev)
{
struct device *dev = &mdiodev->dev;
struct phy_provider *provider;
- struct ns2_pci_phy *p;
struct phy *phy;

phy = devm_phy_create(dev, dev->of_node, &ns2_pci_phy_ops);
@@ -69,16 +63,7 @@ static int ns2_pci_phy_probe(struct mdio_device *mdiodev)
return PTR_ERR(phy);
}

- p = devm_kmalloc(dev, sizeof(struct ns2_pci_phy),
- GFP_KERNEL);
- if (!p)
- return -ENOMEM;
-
- p->mdiodev = mdiodev;
- dev_set_drvdata(dev, p);
-
- p->phy = phy;
- phy_set_drvdata(phy, p);
+ phy_set_drvdata(phy, mdiodev);

provider = devm_of_phy_provider_register(&phy->dev,
of_phy_simple_xlate);
--
2.5.0
\
 
 \ /
  Last update: 2016-09-17 09:56    [W:0.084 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site