lkml.org 
[lkml]   [2016]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH 0/1] Portable Device Tree Connector -- conceptual
From
Date
On 07/07/16 00:15, David Gibson wrote:
> On Sat, Jul 02, 2016 at 04:55:49PM -0700, frowand.list@gmail.com wrote:
>> From: Frank Rowand <frank.rowand@am.sony.com>
>>
>> Hi All,
>>
>> This is version 2 of this email.
>>
>> Changes from version 1:
>>
>> - some rewording of the text
>> - removed new (theoretical) dtc directive "/connector/"
>> - added compatibility between mother board and daughter board
>> - added info on applying a single .dtbo to different connectors
>> - attached an RFC patch showing the required kernel changes
>> - changes to mother board .dts connector node:
>> - removed target_path property
>> - added connector-socket property
>> - changes to daughter board .dts connector node:
>> - added connector-plug property
>>
>>
>> I've been trying to wrap my head around what Pantelis and Rob have written
>> on the subject of a device tree representation of a connector for a
>> daughter board to connect to (eg a cape or a shield) and the representation
>> of the daughter board. (Or any other physically pluggable object.)
>>
>> After trying to make sense of what had been written (or presented via slides
>> at a conference - thanks Pantelis!), I decided to go back to first principals
>> of what we are trying to accomplish. I came up with some really simple bogus
>> examples to try to explain what my thought process is.
>>
>> This is an extremely simple example to illustrate the concepts. It is not
>> meant to represent the complexity of a real board.
>>
>> To start with, assume that the device that will eventually be on a daughter
>> board is first soldered onto the mother board. The mother board contains
>> two devices connected via bus spi_1. One device is described in the .dts
>> file, the other is described in an included .dtsi file.
>> Then the device tree files will look like:
>>
>> $ cat board.dts
>> /dts-v1/;
>>
>> / {
>> #address-cells = < 1 >;
>> #size-cells = < 1 >;
>>
>> tree_1: soc@0 {
>> reg = <0x0 0x0>;
>>
>> spi_1: spi1 {
>> };
>> };
>>
>> };
>>
>> &spi_1 {
>> ethernet-switch@0 {
>> compatible = "micrel,ks8995m";
>> };
>> };
>>
>> #include "spi_codec.dtsi"
>>
>>
>> $ cat spi_codec.dtsi
>> &spi_1 {
>> codec@1 {
>> compatible = "ti,tlv320aic26";
>> };
>> };
>>
>>
>> #----- codec chip on cape
>>
>> Then suppose I move the codec chip to a cape. Then I will have the same
>> exact .dts and .dtsi and everything still works.
>>
>>
>> @----- codec chip on cape, overlay
>>
>> If I want to use overlays, I only have to add the version and "/plugin/",
>> then use the '-@' flag for dtc (both for the previous board.dts and
>> this spi_codec_overlay.dts):
>>
>> $ cat spi_codec_overlay.dts
>> /dts-v1/;
>>
>> /plugin/;
>>
>> &spi_1 {
>> codec@1 {
>> compatible = "ti,tlv320aic26";
>> };
>> };
>>
>>
>> Pantelis pointed out that the syntax has changed to be:
>> /dts-v1/ /plugin/;
>>
>>
>> #----- codec chip on cape, overlay, connector
>>
>> Now we move into the realm of connectors. My mental model of what the
>> hardware and driver look like has not changed. The only thing that has
>> changed is that I want to be able to specify that the connector that
>> the cape is plugged into has some pins that are the spi bus /soc/spi1.
>>
>> The following _almost_ but not quite gets me what I want. Note that
>> the only thing the connector node does is provide some kind of
>> pointer or reference to what node(s) are physically routed through
>> the connector. The connector node does not need to describe the pins;
>> it only has to point to the node that describes the pins.
>>
>> This example will turn out to be not sufficient. It is a stepping
>> stone in building my mental model.
>>
>> $ cat board_with_connector.dts
>> /dts-v1/;
>>
>> / {
>> #address-cells = < 1 >;
>> #size-cells = < 1 >;
>>
>> tree_1: soc@0 {
>> reg = <0x0 0x0>;
>>
>> spi_1: spi1 {
>> };
>> };
>>
>> connector_1: connector_1 {
>> spi1 {
>> target_phandle = <&spi_1>;
>> };
>> };
>>
>> };
>>
>> &spi_1 {
>> ethernet-switch@0 {
>> compatible = "micrel,ks8995m";
>> };
>> };
>>
>>
>> $ cat spi_codec_overlay_with_connector.dts
>> /dts-v1/;
>>
>> /plugin/;
>>
>> &connector_1 {
>> spi1 {
>> codec@1 {
>> compatible = "ti,tlv320aic26";
>> };
>> };
>> };
>>
>>
>> The result is that the overlay fixup for spi1 on the cape will
>> relocate the spi1 node to /connector_1 in the host tree, so
>> this does not solve the connector linkage yet:
>>
>> -- chunk from the decompiled board_with_connector.dtb:
>>
>> __symbols__ {
>> connector_1 = "/connector_1";
>> };
>>
>> -- chunk from the decompiled spi_codec_overlay_with_connector.dtb:
>>
>> fragment@0 {
>> target = <0xffffffff>;
>> __overlay__ {
>> spi1 {
>> codec@1 {
>> compatible = "ti,tlv320aic26";
>> };
>> };
>> };
>> };
>> __fixups__ {
>> connector_1 = "/fragment@0:target:0";
>> };
>>
>>
>> After applying the overlay, the codec@1 node will be at
>> /connector_1/spi1/codec@1. What I want is for that node
>> to be at /spi1/codec@1.
>>
>>
>>
>> #----- magic new syntax
>>
>> What I really want is some way to tell dtc that I want to do one
>> level of dereferencing when resolving the path of device nodes
>> contained by the connector node in the overlay dts.
>>
>> Version 1 of this email suggested using dtc magic to do this extra
>> level of dereferencing. This version of the email has changed to
>> have the kernel code that applies the overlay do the extra level
>> of dereferencing.
>>
>> The property "connector-socket" tells the kernel overlay code
>> that this is a socket. The overlay code does not actually
>> do anything special as a result of this property; it is simply
>> used as a sanity check that this node really is a socket. The
>> person writing the mother board .dts must provide the
>> target_phandle property, which points to a node responsible for
>> some of the pins on the connector.
>>
>> The property "connector-plug" tells the kernel overlay code
>> that each child node in the overlay corresponds to a node in the
>> socket, and the socket will contain one property that is
>> a phandle pointing to the node that is the target of that child
>> node in the overlay node.
>>
>>
>> $ cat board_with_connector_v2.dts
>>
>> /dts-v1/;
>>
>> / {
>> #address-cells = < 1 >;
>> #size-cells = < 1 >;
>>
>> tree_1: soc@0 {
>> reg = <0x0 0x0>;
>>
>> spi_1: spi1 {
>> };
>> };
>>
>> connector_1: connector_1 {
>> compatible = "11-pin-accessory";
>> connector-socket;
>
> I don't see any advantage to allowing connectors anywhere in the tree:
> pretty much by definition a connector is a "whole board" concept. So
> I think instead they should all go in a new special node under the
> root, say /connectors. With that done, you don't need the
> connector-socket tag any more.

That seems like a good idea.


>
>> spi1 {
>> target_phandle = <&spi_1>;
>> };
>> };
>>
>> };
>>
>> &spi_1 {
>> ethernet-switch@0 {
>> compatible = "micrel,ks8995m";
>> };
>> };
>>
>>
>> $ cat spi_codec_overlay_with_connector_v2.dts
>>
>> /dts-v1/;
>>
>> /plugin/;
>>
>> &connector_1 {
>> connector-plug;
>> compatible = "11-pin-accessory";
>>
>> spi1 {
>> codec@1 {
>> compatible = "ti,tlv320aic26";
>> };
>> };
>> };
>>
>>
>> The spi_codec_overlay_with_connector_v2.dtb __fixups__ information
>> is unchanged from the previous example, but the kernel overlay
>> code will do the correct extra level of dereferencing when it
>> detects the connector-plug property in the overlay.
>>
>> The one remaining piece that this patch does not provide is how
>> the overlay manager (which does not yet exist in the mainline
>> tree) can apply an overlay to two different targets. That
>> final step should be a trivial change to of_overlay_create(),
>> adding a parameter that is a mapping of the target (or maybe
>> even targets) in the overlay to different targets in the
>> active device tree.
>>
>> This seems like a more straight forward way to handle connectors.
>>
>> First, ignoring pinctrl and pinmux, what does everyone think?
>>
>> Then, the next step is whether pinctrl and pinmux work with this method.
>> Pantelis, can you point me to a good example for
>>
>> 1) an in-tree board dts file
>> 2) an overlay file (I am assuming out of tree) that applies to the board
>> 3) an in-tree .dtsi file that would provide the same features as
>> the overlay file if it was included by the board dts file
>>
>> It should be easier to discuss pinctrl and pinmux with an example.


>
> Hrm.. so I think you're trying to stick too close to the existing
> overlay model. Something I've always disliked about that model is
> that the plugin can overlay *anywhere* in the master tree, meaning it
> must have intimate knowledge of that tree. Instead of using the
> global __symbols__, there should be a set of "symbols" local to the
> specific connector (socket), which are the *only* points which the
> plugin is allowed to overlay or reference.

That sounds like a good idea.


> Given that we're going to need new code to support this new connector
> model, I think we should also fix some of the uglies in the current
> overlay format while we're at it.

I like that way of thinking.


> I have to run now, but I'll try to send out a counter-proposal
> shortly.

-Frank

\
 
 \ /
  Last update: 2016-07-08 22:01    [W:0.369 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site