lkml.org 
[lkml]   [2016]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] ASoC: sunxi: Add bindings for sun6i to SPDIF
On 30 July 2016 at 17:17, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> On Sat, Jul 30, 2016 at 04:27:15PM +0200, codekipper@gmail.com wrote:
>> From: Marcus Cooper <codekipper@gmail.com>
>>
>> The A31 SoC uses the same SPDIF block as found in earlier SoCs, but its
>> reset is controlled via a separate reset controller.
>>
>> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
>> ---
>> Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 3 +++
>> 1 file changed, 3 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
>> index 13503aa..4fe80f7 100644
>> --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
>> +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
>> @@ -9,6 +9,7 @@ Required properties:
>>
>> - compatible : should be one of the following:
>> - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
>> + - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
>>
>> - reg : Offset and length of the register set for the device.
>>
>> @@ -25,6 +26,8 @@ Required properties:
>> "apb" clock for the spdif bus.
>> "spdif" clock for spdif controller.
>>
>> + - reset : reset specifier for the ahb reset (A31 and newer only)
>
> Isn't it resets ? (plural)

Dohh..yes it is. Do you want me to send an updated patch series, a
single patch change or could I beg for your commit massaging?
Thanks,
CK
>
> Thanks,
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com

\
 
 \ /
  Last update: 2016-07-30 18:01    [W:0.078 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site