lkml.org 
[lkml]   [2016]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] ASoC: sunxi: Add bindings for sun6i to SPDIF
Date
From: Marcus Cooper <codekipper@gmail.com>

The A31 SoC uses the same SPDIF block as found in earlier SoCs, but its
reset is controlled via a separate reset controller.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
index 13503aa..4fe80f7 100644
--- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
@@ -9,6 +9,7 @@ Required properties:

- compatible : should be one of the following:
- "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
+ - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC

- reg : Offset and length of the register set for the device.

@@ -25,6 +26,8 @@ Required properties:
"apb" clock for the spdif bus.
"spdif" clock for spdif controller.

+ - reset : reset specifier for the ahb reset (A31 and newer only)
+
Example:

spdif: spdif@01c21000 {
--
2.9.2
\
 
 \ /
  Last update: 2016-07-30 17:01    [W:0.264 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site