lkml.org 
[lkml]   [2016]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb: remove redundant dependency on USB_SUPPORT
Date
The whole Kconfig entries of the USB subsystem are surrounded with
"if USB_SUPPORT" ... "endif", so CONFIG_USB_SUPPORT=y is surely met
when these two Kconfig options are visible.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

drivers/usb/core/Kconfig | 1 -
drivers/usb/dwc3/Kconfig | 2 +-
2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index dd28010..253aac7 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -85,7 +85,6 @@ config USB_OTG_FSM

config USB_ULPI_BUS
tristate "USB ULPI PHY interface support"
- depends on USB_SUPPORT
help
UTMI+ Low Pin Interface (ULPI) is specification for a commonly used
USB 2.0 PHY interface. The ULPI specification defines a standard set
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 11864e4..3c6213c 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -1,7 +1,7 @@
config USB_DWC3
tristate "DesignWare USB3 DRD Core Support"
depends on (USB || USB_GADGET) && HAS_DMA
- select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
+ select USB_XHCI_PLATFORM if USB_XHCI_HCD
help
Say Y or M here if your system has a Dual Role SuperSpeed
USB controller based on the DesignWare USB3 IP Core.
--
1.9.1
\
 
 \ /
  Last update: 2016-07-22 11:01    [W:0.282 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site